- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will have to resset it ,some have a reset button on the fuse compartment inside de vehicle or others yu wil have to put the key to the on position and press the gas pedal 3 times and then turn it on and it will reset. and also some that have controls on the steering wheel will have an option to resset it there
you will have to resset it ,some have a reset button on the fuse compartment inside de vehicle or others yu wil have to put the key to the on position and press the gas pedal 3 times and then turn it on and it will reset
160.000-engine oil and filtr replace brake pads and disck heck condycion posible replace time belt replace check level oil gearbox swith off service light: Switch ignition off Press and hold buton ( 0.0 ) right said under spido clok Switch ignition on Press buton ( hmin) left said under rev-coutner clok engine The new service interval is displayed Switch ignition Off SERVICE LIGHT OFF finish Good Look
1. Turn key in ignition to "On" without starting the car... 2. Depress accelerator fully 3 times within 10 seconds 3. Turn key in ignition to "LOCK". on number 2, do it slowly all the way to the floor but within the 10 seconds
Press
and hold the "Control Lock" button for five seconds to lock the dryer.
Release the button when the dryer beeps, indicating that the dryer is
in locked position.
Press and hold the "Control Lock" button for five seconds to release the lock.
Press
and hold the "Options" and "Select" buttons at the same time on
Frigidaire dryer models that do not have a "Control Lock" button. Hold
the buttons for 10 seconds until "LOC" is displayed.
Press and hold the "Options" and "Select" buttons simultaneously and hold for 10 seconds to release the door lock.
Maybe your printer are out of ink or have an error just like LED (Light Emiting Diode) blinking on the resset button. If that was the error like blinking of the resset button try to press the resset button if they could not resolved the problem and it is still blinking. You need to turned off your printer and check the ink on the cartridge or check the ink lever of you printer. Then turned it On again and try to print if you have check and change the cartridge for a new ink.
switch ignition OFF press and hold button on right side (0.0) switch ignition ON release button press buton on left side (h clock button) the new service interval is displeyed switch ignition OFF
×