Cpi font i need to know whats official font that is used on stickers

gee a debadged moped ..

is this it
http://motorcycle-repair-manual.jimdo.com/cpi/

CPI - motorcycle manuals PDF - Jimdo
motorcycle-repair-manual.jimdo.com/cpi/

You can download user's manual where it explains how to use your printer's control panel to change one of 6 inbuilt fonts.

read this short tutorial

http://maintenanceprinter.blogspot.com/2011/07/how-to-change-fonts-in-epson-lx-300.html

Download manual:
Descargar Epson LX 300 II

I guess you can change fonts using control characters but I don't know if you can embad tham in a word doc. No way to test it because I don't have this printer.I remember having done it in early days of DOS word processing with Wordstar.

Hold ALT and type the command character - the numbers 27. In notebook will look like an arrow to the left, followed by writing a command character, examples:
? P Selects 10 cpi
? M Selecting the 12 CPI
? ? Select dense Print - 15 CPI (this character is typed by holding the ALT key figures 15)

goto quick setup then cpi select prefered font size as per need and save it

right click on the printer icon and go to printing preferences.. Under the print font, you may choose the available defaults.

Otherwise , as an alternative solution, each time you print a document, you will have to set the font to the desired type.

Where do you want to set the font?

Do you want the font as the default font on the printer or do you want the application to call the font?

Application wise, to get a 20 cpi character font, you need to place the font change into the document.

Remember, even if you set the default font as a 20 cpi, if the application calls for a 10 cpi font like Courier, the printer will change the default font to the 10 cpi font for the life of the current print job unless there are additional font calls within the print job.

The software (Application always overcomes default settings)

Don

Compressed print is either a font selection issue or a call for a "SI" (Shift In printer control code)

I suspect the problem can be fixed by going into the printer menu and printing out the printer settings.

Look at the default font and see if it is set to 17,1 or 15.X cpi spacing. If it is then that's the problem.

Change the font to a 10 or 12 cpi spacing (Character per inch).

If the setting is fine, then send me a "Print to File" and I can tell yoi if the software is controling the printer. My address is [email protected]

Also, check the application you are using to generate the data file. Make sure you have the correct "Point" size selected for the font.

Don

use courier font. it works just as draft font. no problem in VB-6 i hope it will also work with .Net as well.
tell if dont work.
asad khan
[email protected]

change font size CPI from 10 to 15