New showa shock for my cr250 1996 need help setting it up???

I would buy a new aftermarket one from a company such as Maxton, Hagon or one of the big suspension companies such as Showa or Ohlins. When you try to replace the fluid you will also need to find out where it is leaking from, and then fix it.

hi, there are companies that repaire shox, but wether they can get the parts for showa i dont know, would it be cost affective? there are better shox out there on the market. hi are you uk based, try calling ktech suspension i know they do showa fork spare parts.
Parts Department 01283 559 000

regards
paul

In general, most of the KYB and Showa big bike suspensions are charged to around 140-150 PSI from the factory.

trying to remove rear shocks took off side and rear baggage do I need to remove the rear assembly to take shocks off

set your compression out 10 or 11 your rebound 9 or 10 and your fork oil height to roughtly 380cc.since its in 03 u should drain the fork oil out, u have to unscrew the top cap of the fork while its in the triple clamps( because its easier this way), loosen then take the fork out of the clamps, unscrew the top caps and pull the fork tube down and turn the fork upside down to drain the oil out then hang the forks up upside down for about 15 minutes then add the new oil right in the fork tube were you'll see a spring, just add the oil in there and you'll be fine and u should replace it with a good medium weight oil