SOURCE: What are the valve clearances of the engine of
Valve clearances are
in 0,12 mm
ex 0,15 mm
on cold engine
SOURCE: what are the valve clearances for suzuki gz 125 k9
Intake and exhaust: .003-.005"
*Help me out. Rate me!
SOURCE: what is the clearance of the intake and exhaust valve of kawasaki
Intake: .003-.005"
Exhaust: .006-.008"
*Help me out. Rate me!
SOURCE: 1997 Kawasaki KLX 300 how to set valve clearance
Turn the motor to top dead center and ck the timming marks to make sure you are at the tdc mark it will be the third mark on the fly wheel in the direction rotation of motor or it will have a T mark. Ck to see if the valves keepers are loose or tight if they are tight turn the motor over 360 and ck again if they have play the use a .oo4 on the intake and a .oo6 on the exhaust then ck the compression and see what you get it's should be easy you should have a little bit of drag on the gage but not to much
SOURCE: want to know what is the valve clearance of bajaj ct-100 m/c?
get the engine on top dead center, take valve caps off turn over engine slowly until intake valve just closes u will be close to top dead center there. then i use a small long screwdriver i put in sparkplug hole and turn engine very slow when piston just startes to go back down i adj valves. intake valve 3 thousands and ex valve 5 thousands
4,184 views
Usually answered in minutes!
×