Question about 2002 GMC Envoy

2 Answers

Was driving along heard a noise like i ran over something, checked tires they were ok, had over two hundred miles before needed oil change but there was no oil in engine. put oil in still had the rattling noise took it out of all wheel drive put in in two wheel drive was ok put it back in all wheel drive the rattling noise was thereis it safe to drive for a coup[le of days til i get it fixed

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,654 Answers

I would not recomend driving under these conditions, if you have an axle broke or part of the drive train , it could fail and cause not only damage to the tranny and gearcases, but the wheels could lock up or cause you to lose control. If your not sure what the problem is, get it looked at ASAP. Also don't ever wait that long to check your oil. If your using that much oil you should check it everytime you fill your gas tank.

Posted on Mar 24, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 296 Answers

Yes.

Posted on Mar 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I heard a loud clunk like i ran something over in the back rear tire, now it has a constant noise as the tires turn, any idea what it might be


What you ran over --no idea

What the noise is--no idea

What damage may have been done--can't
guess without the vehicle to check over,you
knew that

Did you not raise & support the vehicle & examine
things & check over the tires real good !

I would park it-- until I resolved the issue

Sep 28, 2014 | Cars & Trucks

1 Answer

Ok I have a 98 z71 on my way home from my friends house tonight every turn i made I heard a LOUD popping clunking noise I could feel it in the floor and steering wheel it's on the front left side.....


Maybe.
Be aware of any changes to steering control. Is it pulling to one side? I have an 01 z71 and my issue, which sounds "similar" to yours is a dry secondary steering shaft which,apparently is common among these trucks. Ask your Mech. to check for that possibility while you're there.

Jan 13, 2012 | 1998 Chevrolet K1500

1 Answer

100.000 miles on a 1998 Jetta 4 cyl gas,, what maintenancee is required?


hi if your talking about service then you need to find out when the timing belt was done last if it has not been done then its due.

other than that you need to check gearbox oil level
change oil and oil filter
change air filter
change spark plugs
change fuel filter
check tyres and tyre pressure
check lights working
check washer bottle fluid level and check its working
take it for a drive on a bumpy road and listen for any knocking noises if any are heard then bottom ball joint needs replacing.

i hope i have given you enough to be getting on with.

let me know how you get on or if you need further assistance ok

Aug 27, 2010 | 1998 Volkswagen Jetta

1 Answer

"humming" noise after tire replacement


check the wheel bearing sounds like a problem there.

Jan 11, 2010 | 2004 Lexus GX 470

3 Answers

I have a 2005 dodge neon sxt, in the morning when I start it up I hear a loud knocking noise from the engine but after about 15 seconds it gets softer but is still there all day when I'm driving around.


It is probably your lifters sticking. Check your engine oil level and if thats fine, then add some oil detergent/additive that says it will "reduce engine knock and free sticky lifters" run with that additive for a couple hundred miles or until the noise gets better. then replce your oil after that without using the additive

Nov 22, 2009 | 2005 Dodge Neon

3 Answers

I have a toyota corolla 2001 and I am wondering if a P17570r14 would have a smoother ride than a p17565r14?


the 70 has a higher aspect ratio so it will ride smoother becasue it is taller between the wheel and the ground.

Oct 07, 2009 | 2001 Toyota Corolla

1 Answer

Change brake pads on saturn ion 2004


my car was stollen and used in a robbery and high speed chase.the strip was used to flatten the front tires and he still ran 1mile and a half on them flat.but my insurence payed to get it fixed after my 500.00 deduct.when i got it back i have damage to the front finder they didnt fix.and after i traveld 500 miles to come back home i have a bad noise in front when i had the oil changed i had him check it and he said something had gotten into the brake shoe pasanger side and chued it up now im afaried to drive it and dont have the money now to fix it is this maybe from all that went on with it he ran across a yard and colbert i was told that its hard to get stones in the brakes to do that kind of damege.should i go back to insurance co.i had asked them to make sure they checked out good now im in another state

Jul 06, 2009 | Saturn SL2 Cars & Trucks

1 Answer

My oil pressure light comes on at very low speed on 96 camry


Take a gauge and check you oil pressure. If its not low then change the pressure sensor. If the pressure varies and the pressure is not where it is supposed to be, then drop the oil pan and look in the bottom of the pan. If you see slivers of metal then the bearings are going out. Eather the cam bearing, rod bearing, or main bearings.

Mar 17, 2009 | 1996 Toyota Camry

1 Answer

Car shut itself down?


If the engine overheated for any length of time, it may have some fried rubber hoses and worse, a blown head gasket. If the latter has occurred, in the next couple of hundred miles, oily deposits may show up in the coolant overflow bottle or an emulsion of coolant and oil on the dipstick. This will look like dirty hand creme if it happens. If the gasket fails badly enough, there may be leakage of oil or coolant on the block below the junction with the head. If the gasket fails between cylinders, the engine may seem really tired or misfire and eat fuel. 
Worst case; damaged piston rings, rod and crankshaft bearings along with damage to other seals and gaskets.
For right now, I would make sure the cooling system gets tight again, the oil is changed (it may have chunks of burned oil in it) and drive conservatively with ears open and NO MUSIC for a few days to listen for irregular engine noises that could be caused by the engine damage described.   

Oct 08, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
2002 GMC Envoy Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...