At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 2004 chevy duramax 2500HD in my garage right now that wont start. We had it running before to pull it in and all we did is replace the fuel filter on it and it wont start now.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Duramax fuel filter assembly is bad about sucking air. Replace the fuel filter assembly. It comes with a new fuel filter. I need some good feedback.
you are getting air in the fuel sys. pump on top of filter push it several times until it gets a little resistance . then try to crank it may take a few seconds . it happens after hard driving or sitting for a while.
Hello,
The requirement is 10 QTS. I use 10 and check it cause some times they hold 11 QTS. I hope this helps. If you have more questions reguarding this or other conserns please ask me. Please remember high ratings are very important to me.
who did a conversion on this truck???? the duramax is a common rail engine and can not handle wvo or sve. it will destroy your entire fuel system in no time on this truck. if you want to do a vo conversion you need to get a diesel with an inline injection pump or one of the older powerstrokes. i would suggest you quit trying to run wvo through this truck if you do not want to do a lot of very expensive damage
×