At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Page 116 and 117 of the manual explain that there's a two-position slide switch on the map light, DOOR and OFF. The back light has three positions, ON, Door Activated, and OFF.
If you just want to replace the dome lights the clear buttons on the console can be removed carefully, The buttons will snap out from the console and the bulbs will be underneath.
To reset the tire pressure monitoring system AKA TPMS, take the following steps:
1. Put your vehicle in park on a level surface
2. Turn the ignition to ON
3. Press and hold the TPMS button until the TPMS light blinks twice-the collaboration will begin
4. It would take about 30 minutes of driving at speeds of 50 to 100 KMH for the calibration to finish
5. Once, done, the light will go away
Open your car bulet the go to where the overhead light holder hid remove the overhead light panel then remove the burnt bulb then replace with the new one then couple the panel back and close the bulet and here coming the overhead light working.
×