Po420 catalyst bank 1 reading for 2003 chevrolet tahoe

EXHAUST RELATED ERROR CODES

There are 711 possible PO generic DTC error codes. Only 7 of the 711 codes are exhaust related.

PO401: Insufficient EGR Flow

PO402: Exhaust Gas Recirculation (EGR) Excessive Flow Detected

PO410: Secondary Air Injection System Malfunction

PO420: Catalyst System Efficiency Below Threshold (Bank 1)

PO421: Warm-Up Catalyst Efficiency Below Threshold (Bank 1)

PO430: Catalyst System Efficiency Below Threshold (Bank 2)

PO431: Warm-Up Catalyst Efficiency Below Threshold (Bank 2)

THINGS TO ASK YOURSELF OR YOUR CUSTOMER

Have there been any driveability or performance issues with the vehicle, have there been any recent repairs or tune-up work performed, if so was the check engine light reset and were the codes recorded on previous repair orders.

Do not rely on scan tool data alone. In most applications, the customer will have the check engine light reset prior to repair. If the original cause of converter failure is intermittent, only the catalyst failure code may show up (masking the original reason for converter failure).

Bank 1 is the portion of the engine that houses the #1 cylinder.
How to fix Code P0420 Ricks Free Auto Repair Advice

The Exhaust Converters are worn out
PO420 & PO430

Replace them & then diagnose any other
code issues, from there.

hi,my friend, you can try,

Check for exhaust leaks at the manifold, pipes, catalytic converter. Repair as required.

Use a scope to diagnose the oxygen sensor operation (Tip: The oxygen sensor in front of the catalytic converter normally has a fluctuating waveform. The waveform of the sensor behind the converter should be more steady).

Inspect the downstream heated oxygen sensor (HO2), replace if necessary

Replace the catalytic converter

PO420 code is for catalyst system efficiency below threshold (bank 1) Usually it means that it is time for a new catalytic converter on bank number 1. Cylinder bank number 1 is always the bank with the number 1 spark plug in it.

The PO420 means that the Catalyst System has an Issue'

The actual error is

"Catalyst system below Threshold (bank 1)"

As mentioned above, the code's description is Catalyst System Efficiency Below Threshold (Bank 1). OK, now tell me that again in plain English please.... let's break it down: the catalyst system being referred to is your three-way catalytic converter; so the catalytic converter is not working properly (i.e. it's not efficient). Bank 1 refers to the side of the engine which contains cylinder #1. On inline engines such as 4 & 5 cylinder engines, there is only one bank. So, to really simply things let's just say that the efficiency of the catalytic converter and/or exhaust pipe and/or O2 sensor is not so great.

There are a number of things that could be causing this p0420 catalyst efficiency code. The most common thing is the catalytic converter itself is no longer functioning properly. The other likely thing is the rear O2 (oxygen) sensor is no longer working properly. Other things could include exhaust leaks, damaged exhaust pipes, damaged O2 sensor wiring/connectors, plugged catalytic converter, etc.

You can search for the Information on the web. Just type in the actual error above into you fav search engine!

Hope that helps...

Catalyst System Efficiency Below Threshold Bank 1,
Is telling you that the drivers side converter is not efficient in emission control,It's probably starting to get plugged up.

Need to replace catalyst converter.

Replace the catalytic converter.

p1460 cooling fan circuit,p1153 ho2s insufficient switching bank 2 sensor 1,p1133 insuf. swit. sen. 1 or bank 1 sen. 1,p420 catalyst system efficiency below threshold bank 1,p152 o2sen. circuit high volt. bank 2 sen.1