SOURCE: wiring digram for 08 mazda 6 radio install
not sure how much the radio or harness changed from 2006 until now, but here is a link to some Mazda radio schematics:
http://www.the12volt.com/installbay/vehiclewiring/1/yeard/Mazda.html
SOURCE: need to change headlight on 2003 mazda rx 6
If it is the headlight itself. There may be a cover or shroud on the front of the engin bay. Remove that, may be a combination of clips and screws. If it does not cever the light area, it is even easier. There will probably be 3 screws or nuts, remover these and unplug the electrical to the light. From there you should just be able to pop the light out of place. If you are just replacing the bulbs. Where the power goes into the assembly, turn the clip, may be grey in color and pull out of the headlight assembly and replace the light bulb. But don't touch the new bulb the oils from your skin will damage the bulb.
212 views
Usually answered in minutes!
×