Just got this 2003 mazda 6 it had 2 cd's stuck in the cd player we removed those but the cd player is still not working, no noise its not trying to take a cd I wont eject cd it wont do anything
Be looking at radio fuses replace if blown then recheck..does the radio work? if it does then micro switches in the radio casing were compromised when those cds were jammed in it..
SOURCE: CD player is not working.
I would first try removing the fuse to the radio/cd player, see if that resets the system and get the cd out.
Hope this helps some.
Matt
SOURCE: CD stuck in CD player. Cassette and radio works good. But CD stuck.
This symptom is often a sign the player is nearing its end of useful
life. But, sometimes it is merely due to a collection of dust, dirt or
a foreign object lodged in the mechanism. Sometimes it is a logic
error inside the electronic memories.
So, there are a number of possibilities.
Here is what I would do:
ONE: Do NOT force it or use tools to pull the disc out.
TWO: If you can find the wires that supply the 12 volts to the unit,
pull that wire so there is no power to the unit whatsoever for at least
30 seconds. That will reset the electronics inside the player.
THREE: IF you cannot find the wires, or if they are too hard to get to,
you can pull the plus cable off the battery; raise the hood and with a
wrench loosen the bolt holding the plus cable onto the battery
terminal. Pull it off for at least 30 seconds or longer, then put it
back on. This will perform a hard reset as in TWO.
FOUR: If still no removal try this technique:
http://www.wikihow.com/Remove-a-Stuck-CD-from-a-Car-CD-Player
If it is not an expensive unit you may find it a superior investment to
purchase a new player rather than pay a tech to repair it. (In the
worst case the unit must be pulled, cover removed and disc manually
removed; then you may find out there are damages or defective circuits
awaiting further repairs; probably looking at a charge of $75 or more
if you go to a service shop).
Let's hope the ideas above kick it out and it returns to normal useage.
SOURCE: Loud acceleration noise in my 2003 Mazda 6 2.0 auto
one thing to check is rear engine mounting i have had a stone wedged in one and it causes a nasty noise when accelerating
834 views
Usually answered in minutes!
×