Find diagram of the location of a pcv valve on a toyota tacoma

Generally PCV valves are located on top of the air intake manifold. PCV valves are generally near EGT sensors, or Recirculation valves, Good Luck!

Hi Anonymous:
Sometimes it helps to locate the PCV valve if you can find the tube that connects the engine crankcase to the intake manifold. The PCV valve will be a thumb sized (My thumb anyway) metal (or maybe plastic) cylinder that is part of the tube assembly.

This is the 2001-2012 Toyota Tacoma wiring diagram, Toyota Tacoma IAT (Intake Air Temperature) Sensor Location and the Toyota Tacoma MAF (Mass Air Flow) Sensor Location, also included is a pinout of the sensor. You are likely installing a performance chip or a cold air intake kit for increased HP (Horsepower). You will want to be sure to disconnect the car battery before adding performance products.




Here is the Toyota Tacoma's Iat sensor diagram:

Camshaft Position Sensor

1996 Toyota Truck Tacoma 2WD 2.4L EFI DOHC 4cyl

The Camshaft Position Sensor is located: Under hood, passenger side, front engine area, below valve cover, mounted in distributor

There is none Euro and Japan, Korea don't use them any longer

I'm not sure exactly where it is but they are always on one of the valve covers. it is shaped like an "L" and will have one vacuum hose connected to it and it inserts into a rubber grommet on the valve cover.

The expansion valve is located inside the evaporator box. the book gives you about 1.4 hours to change it but if your not sure about working on ac systems I would recommend using a licensed repair facility.

Fuel filter is in the fuel pump
module assy. in the fuel tank for both V6 and I-4 models with no recommended service interval.

give this website a try to see if they have your car listed it www.autozone.com if they do not stop at a local toyota dealer in the part department and i am sure they would print you out a diagram for your truck