I NEED TO REMOVE AND REPLACE A ECM BOARD FROM A 98 CHRYSLER CIRRUS

Perhaps that's why the vehicle was scrapped? There is some help in the link

https://www.google.com/search?q=98+Chrysler+Cirrus+transmission+wont+shift+out+of+2nd+gear

..

Here is a tutorial on changing the oil in a 98 cirrus (I assume it would be the same on your car) : http://autoresource.internetautoguide.com/change-oil-98-chrysler-cirrus-3178.html

Try a new antitheft relay. My 98 Sebrin is the middle one of the three on the firewall'

This is the short story.The transmission sends a signal to the ECM that sends a signal to the BCM (This is what locks the doors) The ECM also sends that signal to the ABS. When the ABS doesn't sense a signal from the wheel sensors, the ABS light comes on. Have the codes checked. Let me know. Randy

Hello dawniiey: My name is Roger and I will help you. According to All Data the computer is called a PCM. Whether you ask for a ECM or PCM you should get the right part. Should you need further help please just ask. I would be glad to help you. Please rate the answer as this way I know iy was helpful. Thank You for using Fix Ya. Roger

First check all your fuses to ensure they are good.. When you turn the key to the on position and not starting

how do i disarm an alarm on a 1998 chrysler cirrus?

First open the hood of your car and check where the leak is coming. Thermostat gasket is one source but
it could also come the radiator, radiator hose, or the
water pump. Check all these items, and you can do
the repairs by replacing the defective parts. Except for
water pump that really needs a mechanic to replace the
bearings and the mechanical shaft seal.

You will have to remove the upper intake manifold to replace the rear plug.There are no shortcuts ,and besure to replace the upper intake gasket as well.

to detailed to explain here. buy a hanynes repair manual at local auto store, 17$ it'll explain step by step.