Question about Cars & Trucks

Open Question

One of my units kd2 has rpm sensor code can i replace and how much time is involved

Posted by on

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 145 Answers

SOURCE: CAM SENSOR ENGINE LIGHT. MAX RPM 2000 SOMTIMES

I seen this before first of all don't let the car dealer to BS the way to your money, most of the time is noting wrong whit the sensor it self but is the plug than goes in to the sensor this what i recommend is to buy another sensor from your local auto part store or salvage yard (cheaper) get three pieces of cable and solder directly in to the sensor brake the plastic around the sensor plug if necessary and secure the three cables to it put some silicon in between the solder and the place the new sensor on top of the old one so you now wish wire goes to which and cut and attach one by one. I now this works 100% i have done it my self many times if you need diagrams or sensor locations you can find that at www.alldatadiy.com now if you still have problems unplug all harness especially all the ones than comes from the back of the engine because that engine tends to leak oil on top of the harness if you have wires doing shortcut replace that section you can solder use heat string tube and change the insulation hose they sale those on part stores to put some zip tides on the ends and you will have your car back and will last Note don't let it get to close to the exhaust use zip tides to keep from touching hot areas.

Posted on Jun 10, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 nissan xterra RPM jumping after changing throttle body sensor


It the TPS adjustable?
Need to know that BEFORE getting involved

ALWAYS work from factory service manuals or cd

Why was the TPS Changed? just guessing at codes

Have to component test & understand the parts & system,
again, before, you get involved or you got nothing or as you
found out or put in problems

Aug 12, 2014 | Cars & Trucks

1 Answer

Envoy shakes when stepping on the gas after a stop or slowing down


run fault codes and look for faulty sensors involving- rpm- MAP?MAF - cam/crank position sensors and ho2 s sensors.

Sep 20, 2013 | 2002 GMC Envoy

1 Answer

Codes p0014, p0016 and p1810


Code 14 is for a problem with the exhaust cam sensor, code 16 is for a problem with the crank and cam sensor correlation.
Code 1810 is for a problem with a pressure switch, but it is usually inside the transmission and involves the torque converter.

Jul 01, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

1994 SL1 Code 14 hard cold starts,and revs to about 2500 Rpms onstart then dies.


They make a connector for the sender unit and they have to usually be replaced. Watch which way it goes on since they are a little cumbersome plugging back on...I prefer soldering the new connectors on too.

Jan 06, 2013 | 1993 Saturn SL1

1 Answer

Replaced idle air control sensor, idle rpm to high? 1200


I believe your referring to the mass air flow sensor, poss MAP sensor

Apr 10, 2017 | Saturn SL Cars & Trucks

1 Answer

How to fix p1345 obd code on 97 chevy 1500 5.7 Lt.


P1345 is "Crankshaft position sensor / Camshaft position sensor correlation"

Code P1345 determines if the distributor is installed incorrectly, or if a mechanical malfunction is present in the engine. The light will trigger when the engine is running and the camshaft sensor reference pulse is not detected at a correct relative position with the crankshaft pulse. Most likely causes for this Chevy check engine light code include a faulty crankshaft position sensor, a wiring concern or an improperly installed distributor. A quick check on the crankshaft sensor is to monitor the RPM value with a scan tool while revving up the engine. If the reading is close to twice the expected RPM, then the sensor is likely faulty. There are other less likely concerns possible, such as base engine or computer related issues, but these involve more in depth testing. I hope this information is useful.

May 27, 2011 | 1997 Chevrolet K1500

2 Answers

My check engine light came on and my was bogging and chugging at 2500 to 3000 RPM and now it would not start unless I left the key turned and cranked for 5-10 seconds. Error codes are P0522 Oil Pressure...


There is a new PCM flash for this condition, the Technical service bulletin reference # is 18-026-03. The update will need to be done by a dealer. I would recommend this before replacing any parts.

Jan 21, 2011 | 2003 Chrysler PT Cruiser

2 Answers

Hi, I've sent my toyota prado 1998 (RZJ 95, engine 3RZ, petrol) to diagnostic and it shows 3 error codes: 1. code 31: intake air pressure sensor vacuum sensor signal abnormal 2. code 14: IGT or IGF...


To have so many different codes at the same time indicates that the first place to start looking is the wiring harness itself. Locate the MAP (manifold air pressure sensor - code 31) and IAT (inlet air temperature sensor - code 24) connections. Disconnect and reconnect each sensor a few times and check that the connecting socket and pins are clean and free of corrosion - the codes indicate intermittent breaks. Check all fuses are clean and well mounted. Examine wiring harness for chafing, abrasion and signs of wear. Any intervening connections between the wiring harness and electronic control unit (ECU) need to be checked over and should be free of oily grime.

Nov 17, 2010 | 1996 Toyota Land Cruiser

1 Answer

2003 stratus both sensors replaced still unresolved


Have the exact problem. Replaced cam sensor and timing belt. Still happens intermittently. code is p0344.

May 30, 2009 | 2003 Dodge Stratus

1 Answer

P0125 Trouble Code


Hello;
Looks like the coolant temp sensor for the ecm has started to go out. Test and replace, clear codes and should be ok.
Thanks;
Rich;
RPM Northwest

Jan 26, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...