2008 dodge avenger rt cooling temperature sensor location?

Dana Newcombe

• 1564 Answers
• Posted on Aug 29, 2009

SOURCE: where is the camshaft postion sensor located on a

If you mean the Crankshaft position sensor, it is located within the distributor and is quite easily replaced.

SOURCE: Brake Fluid for 2008 Avenger

it's DOT 4 or DOT 5 check with your manual and sometimes it's even in the fluid fill cap.

Testimonial: "Quick response, guided me in the right direction. Thanks!"

SOURCE: 2008 dodge avenger spark plug location and socket size.

• 2008+ Dodge Avenger 2.4L 4cyl.
• Remove plastic cover on top of engine, just pull on each corner for it is friction fit.
• Once removed you will see 4 black spark plug covers with one hex type screw holding each.
• Remove Hex screw and place aside, pull upward to remove plug boot from plug.
• To remove the plug, use a 5/8 socket with a 6" extension. Once plug has been turned out all the way and you cannot get the plug up and out of the hole, just press the plug boot back on the plug and pull it back up.
• Gap and replace 4 plugs with the same or equavalent type,. Drop plug down the hole and use socket to align and tighten until just snug, then torque to manufactures specifications.

Marvin

• 85242 Answers
• Posted on Nov 16, 2010

SOURCE: where is the battery located

To access the battery, turn the wheel fully to the right and remove the left front inner fender shield. The information is on page 379 of the owners manual

Iron

• 3018 Answers
• Posted on Jun 01, 2011

SOURCE: Location of the output speed

• The Output speed sensor is located on the transmission as indicated in the diagram I have put up. They just twist out. Easy fix.