Question about 2008 Dodge Avenger

Where is the battery located on my 2008 Dodge Avenger..?

2 Answers

Marvin

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.
Dodge Master
85,239 Answers

To access the battery, turn the wheel fully to the right and remove the left front inner fender shield. The information is on page 379 of the owners manual

Posted on Nov 16, 2010

Robert Caston

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.
Contributor
21 Answers

The factory clip is broken hanging it up in park take the shifter console apart and you can make it go out of park make or rig up a piece of metal to glide it it works better then there plastic junk one there should also be a recall on that part as well as a recall on the ignition wiring harness as well call up your nearest dealership and ask them about the recall on those two items have a nice day

Posted on Nov 25, 2015

5 Related Answers

Anonymous

2 Answers

SOURCE: where is the battery in a 2008 dodge avenger

It is in the drivers side fender well in front of the tire, it is mounted to the front frame rail. You have to remove the plastic fender lining to get to it.

Posted on Dec 14, 2009

Steve Armendariz

13 Answers

SOURCE: Replace Bulbs in Headlight. 2008 Dodge Avenger

there is 2 bolts on top 1 top outer and 1 top front behind grill, u need to remove the top center black cover and 1 bottom side outer need to remove the inner finder liner to get to the 3rd bolt.
hope that helps, it is stupid

Posted on Mar 23, 2009

Anonymous

1 Answer

SOURCE: 2008 dodge avenger. Will not move out of park.

i have a 2008 dodge avenger in i cant move it out of park

Posted on Oct 22, 2009

cris

236 Answers

SOURCE: Brake Fluid for 2008 Avenger

it's DOT 4 or DOT 5 check with your manual and sometimes it's even in the fluid fill cap.

Posted on Feb 22, 2010

Testimonial: "Quick response, guided me in the right direction. Thanks!"

Anonymous

1 Answer

SOURCE: 2008 dodge avenger spark plug location and socket size.

2008+ Dodge Avenger 2.4L 4cyl.
Remove plastic cover on top of engine, just pull on each corner for it is friction fit.
Once removed you will see 4 black spark plug covers with one hex type screw holding each.
Remove Hex screw and place aside, pull upward to remove plug boot from plug.
To remove the plug, use a 5/8 socket with a 6" extension. Once plug has been turned out all the way and you cannot get the plug up and out of the hole, just press the plug boot back on the plug and pull it back up.
Gap and replace 4 plugs with the same or equavalent type,. Drop plug down the hole and use socket to align and tighten until just snug, then torque to manufactures specifications.

Posted on Feb 23, 2010