Question about 2002 Isuzu Trooper

1 Answer

Location of engine nubmer

I did not find engine number of isuzu begon v-6 kindly tell me

Posted by on

  • Jeff May 11, 2010

    Which engine number are you looking for? If you want the size then its usually on the radiator support or under the hood. If your wanting the actual Identification number then odds are you'll have to pull the engine to find it. Many engines they are on the back sometimes in the bell housing of the transmission, or on the lower sides of the block hidden by the exhaust, starter, or oil filter housing.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Isuzu Master
  • 450 Answers

Left hand side of engine block just above starter motor on raised square section large numbers. the 6VD1 or 6VE1 is on other side of engine block this then goes in front of the number on block the other side.
can see through wheel arches

Posted on Jul 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the crankshaft position sensor on a 2004 isuzu rodeo 3.5

2004 no vin code posted nor the 8th VIN digit for engine code
so answers get 10x harder, lacking that one fact. USA car?
Coin toss 1:
learn the real name of engine, first
6vE1, 4 cams, and last year has VVT, (not trivial that)
and has 2 Cam sensors. to make VVT happy,. dig?
weve answered this many times here, over and over
did the scan tool tell you its bad.?
its on the rear of both heads,

the post above is wrong, he shows the 6vd1w engine,
here just for fun, again i post all V6,s just for you, and others too lazy to search or learn engine REAL NAME.

ill do all 3 V6 engines now.







Mar 18, 2017 | Isuzu Cars & Trucks

2 Answers

Good Day. How do I set the valves gap for a Isuzu 161Z motor, is it on rocking stage or completely loose??

completely loose -- piston on tdc compression stroke
if you know the firing order of the engine if no 1 piston is on compression stroke , the next piston to fire will be on valve overlap or valve rock
when it is in the valve rocking situation then no 1 piston will be at maximum clearance for adjustment purposes
repeat the process for the next piston to fire
for example "- 6 cylinder
firing order -- 1-5-3-6-2-4
with no 1 on compression , no 5 valves will be rocking, no 5 on compression no 3 valves will be rocking with no 3 on compression no 6 valves will be rocking and so on

Nov 26, 2016 | Isuzu Cars & Trucks

1 Answer

Td12xxc3 what kind of engine and year believe its a chevy v-6

That's a tough one! If you need routine maintenance parts like an air filter, oil filter or spark plugs just remove the part and write down the number on the part and get the same part number. If you need stuff like a starter, water pump, etc. you need to look for some kind of ID plate on the engine. Are you sure there is a Chevy engine in an Isuzu Rodeo???? Can't imagine how they did that!

Aug 14, 2014 | Chevrolet Chevy Cars & Trucks

2 Answers

I have a 2006 Isuzu Ascender with a 6 Cyl. 4.2L Engine and I need to locate the Vapor Canister Purge Valve. Any ideas where it is located. I have looked but am unable to locate it. Is it under a plastic...

Hello have a 2006 Isuzu I-280 and I needed to replace, at this moment, the Evaporative Valve Soleniod which is instaled next to the Vapor Canister. In my case, It is mounted on the frame behind the gas tank you will have to move the spare tire out of the way one bolt holds it in place, this is where the canister is and the valve is mounted on the canister this is where it is mounted on my 2006 I-280. If you need to replace the solenoid and you can't find the original Isuzu part, you can ask for the 2006 Chevy Impala V-6 3.5 Purge Valve Solenoid. It is the same piece. The old Evaporative Vent Valve Solenoid has a number part PA-GF30, and it is the same part number I found in the new Chevy Impala Evaporative Vent Valve Solenoid. Good luck.

Aug 08, 2013 | Cars & Trucks

1 Answer

What order do the connections from numbers 1 to 6 go when connected to the coil pack ? e.g. 1 & 2 go to 1 & 2 of first coil 3 & 4 go to 3 & 2 of second coil 5 & 6 go...


Apr 04, 2011 | Isuzu VehiCROSS Cars & Trucks

1 Answer


Any car repair manual should tell you how to find the engine numbers. I like the Haynes manual; about $20 at autozone. If you ever plan to do any work on your vehicle it is very handy to have a good repair manual

Feb 15, 2010 | 2000 Isuzu Rodeo

1 Answer

Oxygen Sensor on '99 Isuzu Trooper

The O2 sensor is on the engine side (up stream) before the catalytic converter in the exhaust pipe, it is barrel shaped about the size of a jumbo magic marker.

Sep 30, 2008 | 1999 Isuzu Trooper

1 Answer

1992 Isuzu Rodeo Distributor wires 3.1L engine

Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -


If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.

Jul 05, 2008 | 1992 Isuzu Rodeo

1 Answer

1992 Isuzu Rodeo Distributor wires


On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .


Hope this works for you

Jul 05, 2008 | 1992 Isuzu Rodeo

1 Answer

Cylinder number for firing order for 1995 Isuzu Trooper


Assuming your 1995 Isuzu Trooper is using the 3.2 SOHC engine, the firing sequence would be as shown here.
351636c.jpg. This was originally posted here. An actual image 47d297f.jpg which was originally posted here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 16, 2008 | 1995 Isuzu Trooper

Not finding what you are looking for?
2002 Isuzu Trooper Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides