Why would my Triumph R3 tail light not work, when the light works for breaks and emergency lighting?

SOURCE: Front light, tail light and

for the dashboard... have you checked the intensity control? It happened to a friend of mine.

SOURCE: Tail break lights don't work. Window break light does work however. Bulbs have been replaced.

Check the brake light fuse. The high mounted brake light (third brake light) is on a different circuit than the brake lights. Hope this helps.

SOURCE: no turn signals, no tail lights and fuses are good

Replace the non-working tail light bulb. Try replacing the bulbs for the turn signals. If that doesn't work, replace the relay.

SOURCE: Tail lights not working . Checked the fuse, and

you could have a faulty switch. or broken wiring back along the car!

SOURCE: 2001 GMC Jimmy break lights not working but all

Check the brake light switch should be a orange wire with 12v then a white wire with 12v when the pedal is pressed.If htat cks good then ck the hazard switch by moving it up and down and wiggeling the knob with the brake pedal pressed if they start working then your multifunction switch is bad and needs to be replaced.

Testimonial: "We check and you were right on the money. It's the hazard switch carrier. Thanks for you help."