Cars & Trucks Logo

Related Topics:

l
lyall bidois Posted on Feb 15, 2015
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Front head head light.I think a bulb has blown, have a ford courier 2000 model. Are the a concealed unit do you have to buy the whole light, or can you buy the light that has blown

Nothing im asking you

1 Answer

stephen peirce

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Ford Master 1,882 Answers
  • Posted on Feb 16, 2015
stephen peirce
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 29, 2012
Answers
1882
Questions
0
Helped
670824
Points
5406

The ford courier is the Brazilian tag name for the ford ranger pick up truck the headlight is a 9007 dual beam bulb you can by this at the auto parts store for $10 - $12 dollars here's a picture of it
Front head head light.I think a bulb has blown, ha - front-head-head-light-think-bulb-blown-egfwkdwwkv4lskpyxjwsfau4-4-0.jpg
open the hood and look for this retainer at the back of the headlight and twist it while pressing in, it will turn and the tabs will unlock and that's how the light comes out BE VERY CAREFUL WHEN INSTALLING THIS BULB YOU CAN NOT TOUCH THE GLASS WITH YOUR HANDS THE OIL FROM YOUR SKIN WILL FRY ON THE GLASS AND BLOW THE NEW BULB USE A PAPER TOWEL OR RUBBER GLOVES IF YOU DO TOUCH THIS WIPE OFF THE GLASS WITH ALCOHOL AND LET IT DRY THE PUT IT INSIDE THE ASSEMBLY ALIGNING THE NOTCHES YOU SEE IN THE BULB AND THE ASSEMBLY THEN PUSH IN THE TWIST LOCK ALIGNING THOSE TABS YOU SEE TO LOCK IT IN PLACE AND YOUR DONE GOOD LUCK AND BUY THE 2 PACK OF BULBS FOR $20.00 YOU MIGHT NEEDIT FOR THE OTHER SIDE THEY USUALLY BLOW OUT ONE AFTER ANOTHER STEPHEN

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ford Courier with F8 motor. Torque setting for it from main bearing to cylinder head please?

https://www.google.com/search?q=Ford+Courier+F8+motor+torque+settings

Torque setting for Ford Courier F8 motor from main bearing

Fixya https://www.fixya.com > Forum > Cars & Trucks > Ford
10 hours ago - Main Bearings Torque specs. 40-43 Ft. Lbs. Cylinder Head Torque specs. 56-60 Ft. Lbs. Read full answer. Oct 05, 2009 • ...

What are the torque settings for a 1997 ford courier 2.2

JustAnswer https://www.justanswer.com > Australian Car Repair
Jul 1, 2021 - Tighten special flywheel-to-crankshaft bolts to 73-87 Nm (54-64 ft. lbs.). 35.If equipped, install clutch disc and clutch pressure plate and ...

1 answer · Top answer: TORQUE SPECIFICATIONS Connecting Rod [https://my.alldata.com/repair/#/repair/vehicle/26150/component ...

1.8 ford courier 8valve torque settings on cylinder head

Fixya https://www.fixya.com > ... > Ford > Expedition
Sep 4, 2008 - First torque value is 58 ft lbs.....then final torgue is 72 ft lbs. Posted on Mar 21, 2009. 0.

Torque Settings

Kiwi Cylinder Heads Ltd https://www.cylinderheads.co.nz > torque-settings
Cylinder Head Torque Settings.

Torque Specifcations

MAHLE Aftermarket https://www.mahle-aftermarket.com > torque3
Make. Liter CID. Engine Model Year. Rod Torque. Main Torque. Cylinder Head Bolt Torque. ACURA. 1.6. 97. D16A1. 86-89. 23 FT/LBS. 40 FT/LBS. 22, 47 FT/LBS.
124 pages
..
0helpful
1answer

I haven't got low or high beam headlights on my 99 ford courier. My light bar, tail &park lights work.what is the problem?

You either have a blown fuse or a blown seal beam so check your fuses first and to do so you need a test light and after testing the fuses take the head light out and with the light switch on test the integrity of the light socket ,so good luck
0helpful
2answers

How to replace the rear signal light

The whole light assembly comes out and you can remove the bulb assembly from behind. There will be a couple of screws accessible from the trunk compartment behind the concealment panels.
0helpful
1answer

Is there a headlight wiring loom for a chrysler voyager, or do I have to replace the entire headlight unit

Loom? The 1990 Models were mixed. Before that the whole head light was replaced. In the 2000 year models you need to locate the collar on the back of the head light, turn it counter clockwise and remove the bulb from the headlight assembly. Unplug bulb and replace then reverse the process to install. If you use the little machine that Walmart usually keep near the replacement bulbs in the Automotive section you can get verification of what type you have if your not sure. You will need to know the Year and model of your vehicle.
0helpful
1answer

I need to change the brake light bulbs in my 2002 ford courier

This is a pretty simple DIY I just didi it last Saturday! When you open the hatch there are 2 robertson screws on the side of the door seal where the tail lights meet the door opening. Remove both screws and pull the tail light lens straight out towards you trying not to pull the inside out much further than the other side (it is held in with clips on the outer edge that may break. The whole light assembly will come out in your hands with only the bulb holder wires keeping it attached. The bulbs twist 1/4 turn to remove and easy replacement of the bulb. Do the reverse to replace! Hope this helps
0helpful
1answer

I own a 1995 honda odyssey minivan and the drivers front head light is not working because of the wire connection? what do i do to fix this problem because I got stop for having only one headlight? thank...

hello annette from uk you think it may be connection ?? is head light not working on dipped beam? but high beam ok ? if so it may well be the low beam element in h/light bulb has blown however you could also check the fuse as each side head and sidelights have their own fuse check handbook for position of fusein box if ok then you can try the other head light bulb from other side into the plug connector of drivers side and if this works on high+low beams ? your old bulb is blown feel sure you can do these checks !? approx price of new bulb in uk £4 -50 but carry out above checks !st b 4 you buy bulb ? if it is a bad connection on plug ? another bulb will have same problem hope you understand all above ? and wish you good luck from n/west uk
0helpful
2answers

Heater not working,sludge in header tank on ford courier van

Sounds very much like your cooling system is full of ****. It would pay to have the cooling system flushed, including the radiator. If the sludge builds up it blocks the heater tap. This could also cause problems in regards to the cooling system as a whole, and potentially blow a head gasket. Check the color of the sludge. If it looks like a chocolate milkshake, it may denote a head gaset problem, and the sludge may actually be oil in the water.
0helpful
1answer

2000 Windstar head light power door lock and front blinker

Check your fuses under hood and on dash. Some of these use two different fuses for rt. & lt. Look in you owners manual for the correct fuses to check. If it is a fuse problem, you will have to find out why the fuse was blown. Good luck
0helpful
1answer

Over head light not working

make sure the light switch is in the off position, prise out the light assembly at the side opposite the switch disconnect the wiring connector you should then be able to take out unit and change bulb
1helpful
1answer

Stereo light bulb replacement.

deep inside head unit at front is the led to replace .. likely soldered into a board there as a non replaceable part ..remove head unit ..disassemble to get behind front panel...good luck..maybe this is not a worthwhile project money/ time wise.... my 2 cents
Not finding what you are looking for?

84 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...