Not sure, but it _will_ be a metric size, not SAE like American tool sizes.
SOURCE: 1996 timing belt changed, lined up all the marks,
Hi my name is juan and lets try to solve this it is possible that when you rotated the camshaft the distributor last his position and this is why it won't start it may not be the problem but this happens a lot so open your distributor and aline up your marks on camshaft and the crankshaft then make sure the distributor is pointing near the #1 spark plug if is opposite give it a 1 more turn to the crankshaft line up your marks again and se what happens #1 spark plug is the closets to the front part of the engine on 4cil
SOURCE: Failed evap test on 1995 mazda b2300
did u try hoses that go to evap canister? and the evap canister itself? Thanks, Lee
SOURCE: lost bolt for harmonic balancer what size is it?
I have seen this and you can be glad if the balancer didn't move and damage the crank or t-belt area. Get another bolt and torque it correctly.
SOURCE: Need bolt size to remove a harmonic balancer from
Most fords are 15/16 inch. butyou didnt state the engine size. Youll also need a harmonic balancer puller and most parts stores can rent you one some times for no charge ( just pay for it and bring it back all together and you'll get all or most of your money back). with the balancer off you'll need to ut it or a new one back on You need a harmonic balancer installer to put it on as beating it back onewith a hammer will damage the balancer and the crank and even the whole engine. If you don't want todo all of this just take it to a mechanic that doesthis work all the time ad hasthe correct tools to do itright. Yes you can beat it off and back on but you'll likly do exensive damage. ( not always). If you don't have the right sized sockets andthe power impac to remove the bolt you had best just hire the job done as this is not a do it youself job unless your a regular ( work all day every day) mechanic.
SOURCE: I am looking for a diagram of the fuse box panel
Look inside the fuse box cover, the fuse's layout and designations are usually printed there.
77 views
Usually answered in minutes!
×