At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do i access and fix the linkage on a 2000 Buick...
Im assuming you mean the transmission shifter linkage - problem is that car has a cable. You can see the cable on top of the transmission if you look straight down from the throttle body.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The starter is on the underside of the transmission, there are wires feeding the solenoid (remove) 3 starter bolts (remove) pull off transmission/flywheel
Take the horn button assembly apart--there should be only one wire there (goes to the horn relay) and not be grounded. It goes to the insulated metal part that grounds the plate when button pushed. Unfix the grounded wire and see if horn is quiet. You may need to replace that wire if it still sounds.
remove cowling under hood to expose wiper motor linkage. You have to try it many times but the linkage may not be attached in the correct arc position. Trial by error.
Could be in the shifter switch linkage. Regals have a wiring harness that sometimes give strange problems, check the area near the right trunk support piston (open the trunk) . Harness runs along top right edge of trunk. Pull back the wiring harness plastic shield and check for broken wires. I have seen that area cause problems with the dash and turn signals also.
The pump is located at the left front inner fender forward of the left front wheel. You may remove the inner linning for better access. Please inquire for the TSB update on the pump at the dealer.
×