2012 wrangler sport won't start. lights flicker, buzzes, even when trying to jump start.
SOURCE: 3rd brake light won't work. Replace bulb...nothing
The contacts for the third brake light are two silver discs, about the size of a dime. They are located on the inside of the tailgate, hinge side. Make sure your carpet or any other loose item has not covered one or both contacts. Make sure they are fairly clean and make good contact.
SOURCE: 95 Jeep Wrangler wont start
Well two things are happening here... the people saying fuel regulator, you guys are not having the same problem. the relay buzzing is the indicator that the computer is bad. The relays that are buzzing get engergized by the computer. Notice the Check Engine Light won;t come on until after the buzzing is over. Now the fuel problem is different from that becuse the computer is working fine but the pump can't build enough pressure in the first second (like it is suppose to do) during the priming before you turn the key to start. Sorry for all you with the computer problem ain't cheap...
SOURCE: jeep alarm will not turn off
The ignition security on/off is located at the trunk lock. unlock and lock rear gate and the alarm will turn off. My jeep sat in my drive for a month before a jeep tech told me this. It still triggers the security sometimes when I unlock the passenger door with the key and I go straight to the rear gate lock and it shuts off instantly.
SOURCE: 1989 jeep wrangler starts jumping and backfiring
Start with the basics...meaning check the spark plug wires and spark plugs. While under the hood, inspect all hoses for a vacuum leak(s). Then turn the ignition key on-off-on-off- on...leave in the on position and write down the number of flashes the check engine light indicates....2 flashes = #2....pause.....3 flashes = #3.
Let start from here. Are you able to perform engine repairs or diagnostics???
261 views
Usually answered in minutes!
×