- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fixyahttps://www.fixya.com > ... > Daihatsu > Terios
Nov 14, 2019 - The tappet clearance for your Hyundai Atos 2007 would be: ... Valve clearance Warm: 0.2 mm intake, 0.25 mm exhaust. ... Valve clearance Cold: 0.1 mm intake, 0.17 mm ...
The valve clearance specification for a Volvo FL10 truck depends on the specific engine model and year of manufacture. Generally, the valve clearance for the FL10 truck with a Volvo D10 engine should be checked and adjusted as follows:
Remove the valve cover: Remove the valve cover to access the valves.
Rotate the engine: Rotate the engine to the top dead center (TDC) position for the cylinder you want to adjust.
Check the valve clearance: Use a feeler gauge to check the clearance between the valve stem and the rocker arm. The specification for the valve clearance should be listed in the engine service manual.
Adjust the valve clearance: If the clearance is not within the specified range, adjust the clearance by loosening the lock nut on the rocker arm and turning the adjustment screw. Tighten the lock nut when the clearance is correct.
Repeat for each cylinder: Repeat the above steps for each cylinder.
Reinstall the valve cover: Once all the valve clearances have been checked and adjusted, reinstall the valve cover.
It is recommended to refer to the engine service manual for specific instructions and specifications for your particular Volvo FL10 engine.
t is possible that a 4bc1 Isuzu engine may fit in a Bedford Elf truck, but it would depend on various factors such as the specific model and year of the truck and engine, and any modifications that may be required to make the engine fit properly. It is recommended to consult with a qualified mechanic or expert in Isuzu engines and Bedford trucks to determine if this engine is a compatible and appropriate option for your specific vehicle.
The valve tappet clearance for the Mazda Bongo Brawny can vary depending on the specific engine model and year. Here are some general specifications for the different engine types:
2.0L FE engine: Intake valve clearance - 0.18-0.22mm, Exhaust valve clearance - 0.28-0.32mm
2.5L WL engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm
2.5L RF engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm
It's important to note that the valve tappet clearance should be checked and adjusted by a qualified mechanic using the correct specifications and tools. Incorrect adjustment can cause engine damage and poor performance.
Valve lash is the end of the rocker arm and the valve stem clearance between. When the engine is running, due to the thermal expansion and contraction, if there is no gap between the rocker arm and the valve stem, rocker arm swells, the top valve open, the impact of engine power and economy. Engine valve clearance will be different, usually when the car is cold, the intake valve 0.08-0.10MM, clearance exhaust valves 0.10-0.12MM Car Diagnostic Tool
This is a really long list and will be difficult to satisfy, but there is help. You can go to your local parts store and purchase a Haynes manual, it contains all the specifications and steps for rebuilding a vehicle of your choice, they are accurate and helpful. with a lot of illustrations and written out steps for any and all procedures.
×