Check the window lock switch on the drivers door
SOURCE: power door locks and windows not working from the drivers side
Check the fuses first. If that dont work take the door apart the wiers have problably lost the connection due to kids and chocolate.
Gotta love them tho.
SOURCE: Driver Side Window won't work- Chevy Blazer 2003
If it does not make any noise, or sound like its getting any power, most likely its the switch.
SOURCE: How to remove/replace driver's side mirror on 96 blazer
remove door panel.. there should be access hole to get to the bolts.
SOURCE: drivers side window switch not working on 2005
the drivers door switch is most likely bad, they get used the most and wear out first, the connector on the back of switch may have come loose and not making good electrical contact, remove switch and check connector and if still not working need new switch, the windows are all on same circuit and either all work or none work so not fuse. extremely rare is a short in wired but not likely.
SOURCE: 94 chevy s10 blazer power windows not working
I had the same problem - driver side fine, passenger side front not working/slow or the back seat. You need to replace the window motor on the passenger side. Yes, there are two motors. It's pretty simple if you are handy with some tools. The hardest part is getting the 4 mounts that hold the window motor to the door off. The are factory riveted to the door, so I had to grind the outsides off and tap them out. Just watch the spring lever that holds the window bar for going up and down. I didn't pay attention and it snapped back - nearly broke my thumb.
Dani-Lynn
74 views
Usually answered in minutes!
×