Mazda b2500 turbo tappet settings - 2000 Mazda B-Series

I'm assuming you mean the B2500? The clearance normally adjusts itself hydraulically. If your just checking the clearance it should be no more than 0.15 mm {0.0059 in} on a Cold engine.

It is unlikely the wiring has moved. Here are the wiring diagrams.

1998 Mazda B-Series Car Stereo Wire Colors and Locations

The12Volt https://www.the12volt.com > installbay > stereodetail
1998 Mazda B-Series Stereo Wiring ; Switched 12V+, Yellow/Black ; Ground, Black ; Illumination, Light Blue/Red ; Dimmer, n/a ; Amplifier Remote, Blue.
Front Speakers: 5" x 7" Doors
Constant 12V+: Light Green
Rear Speakers: 5" x 7" Rear Corners
Left Front (+): Orange/Light Green

1998 Mazda B2500 Stereo Wiring Guide

MODIFIEDLIFE https://www.modifiedlife.com > 1998-mazda-b2500-st...
Our 1998 Mazda B2500 radio wiring diagram shows you all the 1998 Mazda B2500 radio wire colors and what they do. Use our 1998 Mazda B2500 stereo wiring guide to ...

1998 Mazda B2500 Pickup Stereo Wiring Diagrams

tucsonsoundfx.com https://tucsonsoundfx.com > assets > 1998-mazda-b25...
1998 Mazda B2500 Truck Car Stereo Wiring Guide; Car Radio Battery Constant 12v+ Wire: Light Green; Car Radio Accessory Switched 12v+ Wire: Yellow/Black; Car ...

Follow the link mazda b2500 torque sequence and settings cylinder head td bolts

press the helpful button and try links below

http://www.aera.org/uploads/4/3/7/7/43776611/aera-torquespecs.pdf

mazda ford diesel rf r2

I have a Toyota Yaris 2004 plate. The cold light stays,the fan kicks in and stays on, but the cold light does not go off. Help please. regards M Barrett

if it doesn't have hydraulic tappets it is .012" inlet hot and .014" exhaust hot

you haven't mentioned if it is a 4 cyl or not. However bring no 1 cylinder up to tdc and watch the tappets of the next cylinder to fire. when that cylinders rockers are in valve overlap situation ( exhaust starting to close and inlet starting to open) then that will be maximum clearance on no 1 cylinder and is when you set the tappets turning the engine until the next cylinder is at TDC watch for the next cylinder again to be in valve overlap and repeat as for no 1 cylinder

• Tappet clearence for Mazda 2.5 diesel turbo 2002 model

hi the inlet 0.1 +/- 0.005 exhast 0.2 +/- 0.05

call your local auto zone-they can give them to you