The little pin in the steering wheel hub is not engaging the cams in the indicator lever. If you have had the steering wheel of lately then remove it again and ensure that the pin is in the right place.
SOURCE: Replacing front turn signal bulb on 2006 Cadillac SRX
wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.
SOURCE: Front turn indicators don't work, on 04 Cadillac SRX
you may want to check the fuse for the signals and asfor the locked windows, it sounds like your window lock has either seized or the button is off track. In any case, replacement would be the best option.
SOURCE: I have a 1993 cadillac sedan deville cannot locate
The flsher shoul be plugged into the fuse panel. Turn on and listen. If turn signal is not working, The bulb is more likely the problem. Good luck.
SOURCE: where is the flasher module located for the turn
Under the dash on the driver's side, way up inside.
66 views
Usually answered in minutes!
×