Adjust Clock 2007 G6: How do you adjust clock? I got the hour and min. to blink but what do you push to change them?

https://www.carcarekiosk.com/video/2007_Suzuki_SX4_Sport_2.0L_4_Cyl./clock/set_clock

http://www.suzuguide.com/suzuki-257.html

FROM OLDE FIXYA ANSWER

Clock radio reset

Push clock button in and hold until it blinks.
button #5 is hour adjust.
button #6 is the minute adjust.
button #4 is set.
Jan 25, 2012 ' 1996 Suzuki
============================

• Turn the Dakota's ignition on. Find the "Time" button on the top part of the radio control panel.
• Push and hold the "Time" button. After a couple of seconds, you'll notice the hour display starts to blink.
• Turn the "Tune/Scroll" knob to adjust the hour. When the hour is correct, push the "Tune/Scroll" knob. Now you'll notice the minute display blinks.
• Turn the "Tune/Scroll" knob to adjust the clock's minute display. Push the "Tune/Scroll" knob to save the changes to the clock.

Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. To exit, press any button/knob or wait five seconds http://www.chryslercommercialvehicles.com/jeep/download/pdf/manuals/2014-Patriot-OM-1st.pdf page 240

How to set Clock When the ignition switch is in the "ON" position, the display (D) shows the time. 2) To change the hour indication, turn the indicator selector knob (2) left or right repeatedly when the hour indication blinks. To change the hour indication quickly, turn and hold the indicator selector knob (2). To set the hour indi- cation, push the indicator selector knob (2) and the minute indication will blink. 3) To change the minute indication, turn the indicator selector knob (2) left or right repeatedly when the minute indication blinks. To change the minute indication quickly, turn and hold the indicator selector knob (2). To set the minute indication, push the indicator selector knob (2). To change the time indication: 1) Push the trip meter selector knob (1) and the indicator selector knob (2) together. w WARNING If you attempt to adjust the display while driving, you could lose control of the vehicle. Do not attempt to adjust the display while driving.

Hope this helps.

Bob

Hope this helps
If you are talking about the clock on the DVD display then.....

Audio display model
1. Turn the audio unit on by pushing the "PWR"
button.
2. Push the "MENU" button until the display
indicates the clock adjustment mode.
If the "CLOCK OFF" is indicated on the display,
push the "TUNE" button to change the mode
to "CLOCK ON". Then push the "MENU" button
The time indicator will flash.
3. Push the "SEEK TRACK" button to adjust
the hour.
Push the "TUNE" button to adjust the
minute.
Pushing the , buttons will advance
and , buttons will turn back
the time.
4. Push the "MENU" button to finish the
adjustment.

Push clock button in and hold until it blinks.
button #5 is hour adjust.
button #6 is the minute adjust.
button #4 is set.

Hi.

Here the relevant extract from owners manual.

To reset the hour: Push the "MODE" button until the hour display appears and blinks. Then push the "RESET/ADJ" button.
To reset the minutes: Push the "MODE" button until the minute display appears and blinks. Then push the "RESET/ADJ" button.
After resetting the clock, push the "MODE" button until the display returns to normal calendar mode.

Register for free here to get the online support: 2004 Toyota Avalon Owners Manual FREE

Regards.

Ginko

To set the hour, press the CLOCK button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the CLOCK button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.

There should be a button says " TIME" or "Set Up" and make your selection by turning the right knob.

Clock Setting Procedure
1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune /
Audio control.
3. After the hours are adjusted, press the right side Tune /
Audio control to set the minutes.
4. Adjust the minutes using the right side Tune / Audio
control.

Owner's Manual under: INSTRUMENT PANEL AND CONTROLS 195


If this works please give me a rating on my solution, thanks!

OpenSource13


http://www.fixya.com/PostAnswer.aspx?thid=2028796&prdid=696996 where to find your Owner's Manual
4