-
Expert
277 Answers
- Posted on Nov 21, 2010
Re: Were is the BCM located in my 2006 Pont G6
LOCATION IS RIGHT SIDE CENTER CONSOLE
BODY CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
- Disconnect the negative battery cable.
- Remove the right console trim panel.
- Remove the body control module (BCM) screws.
- Remove the BCM wire harness connectors.
- Install the BCM.
- Install the BCM wire harness connectors.
- Install the BCM screws. NOTE: Refer to Fastener Notice in Service
Precautions. Tighten the screws to 2.5 N.m (22 lb in) .
- Install the right console trim panel.
- Connect the negative battery cable.
This was helpfule
does new bcm have to be flashed after replacement
On my 2007 G6, the coil packs aren't individually located under the plugs it's located on a black box or 'unit'. I had a problem with #4 having way more misfires than the others.
It's located at the back of the engine on top, and took about 10 minutes to replace. About $100 at most auto parts stores
×