Question about 2000 Land Rover Discovery

1 Answer

Need head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in.

Need head bolt torque settings for 2000 landrover discovery 4.0 liter

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 117 Answers

Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees

Posted on Apr 13, 2009

  • waver46 Feb 02, 2011

    i need settings for bolt 200 for my phone 6600.pls rply soon.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cylinder head torque specs on a 2000 volvo s70 2.4 Liter


you have torque cylinder head bolts in 3 steps first torque bolts 14 ft lbs then second torque all bolts to 43 ft lbs step three torque all cylinder bolts to plus 90 degrees.

Nov 15, 2012 | 2000 Volvo S40

1 Answer

I would like the cylinder head torque setting for my landrover dicovery2 v8


Hope this helps you.

Cylinder head bolt's torque.

Engine with Suffix B, Cylinder head will have 10 bolt's.
Ft.lbs (N.m)
Step 1 - 15 ( 20 )
Step 2 - Additional 90 deg.
Step 3 - Additional 90 deg.

Engine without Suffix B, Cylinder haed will have 14 bolt's.
Ft.lbs (N.m)
Outer Row 44 (60)
Center Row 66 (90)
Inner Row 66 (90)


2ff67ca.gif28d5a83.gif

Sep 17, 2010 | 1995 Land Rover Discovery

1 Answer

Im having to change my head gasket, whats the torque spec and sequence on a 96 landrover discovery? im changing both head gaskets. anything i should know?


start in middle and work outwards alternately ,bolt torque 80lbs and pull down if three passes ,speed key --rachet- torque wrench .although iam posting this i never use a torque wrench i go by the feel of the bolt stretching ,make sure heads have been checked and skimmed before refitting

Aug 10, 2010 | 1997 Land Rover Discovery

3 Answers

I need torque settings for the engine ie head bolts v6 engine 1


i am replacing the heads on a GMC 350 cu in engine. what is the final torque of the head bolts?

Jul 15, 2010 | 1985 Chevrolet Camaro

1 Answer

I have a 2001 land rover discovery II and I need the torque settings so I can put the engine back togather. Im not sure how tight to tighten the head cylinder bolts or the manifold bolts.


Do not reuse the old head bolts. These are torque-to-yeild type bolts and stretch when torqued down.

Starting in the center and working your way outward:

1st step - 15 ft-lbs

2nd step - 90 degrees

3rd step - 90 degrees

Mar 05, 2010 | 2001 Land Rover Discovery Series II

1 Answer

What are the head bolt tightening specs for a 2000 range rover with a 4 ltr v8


Remember the head bolts are not reusable. They are stretched, not torqued. I can't post illustrations here but the pattern can be found at LR’s service website, www.landrovertechinfo.com (you can register for free). The bolts are tightened to a light torque of 15 foot pounds, then turned through two angles of 90 degrees each.

Jan 10, 2010 | 2000 Land Rover Discovery

1 Answer

Need cylinder head gasket torque specs.


looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!

Sep 18, 2009 | 2000 Ford Focus

1 Answer

Need to know cylinder head bolt torque specs


Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme

2 Answers

Angle Torque settings head bolts


Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

Jan 28, 2009 | 2000 Renault Sportwagon

1 Answer

Cylinderhead bolts torque settings


According to my haynes manual for Landrover 200tdi, G - S reg,1989-1998 it goes as follows,
Stage 1:- Tighten all bolts to 30lb ft or 40Nm then
Stage 2:- Angle tighten a further 60 degrees then
Stage 3:- Angle tighten a further 60 degrees again.

Nov 29, 2008 | 1994 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

1,103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...