2000 Land Rover Discovery "torque 2" Questions

...14 bolt's. Ft.lbs (N.m) Outer Row 44 (60) Center Row 66 (90) Inner Row 66 (90) Here is a list for the torque and torque ...

...head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in. Need head bolt torque settings for 2000 landrover discovery 4.0 liter Stage 1 20nm Stage 2 +90 degrees Stage 3 +90 ...

...torque settings thanks According to my haynes manual for G-S reg, 1989-1998 it goes as follows, Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head. Stage 2:-Tighten all bolts ...

Torque settings for cylinderhead bolts on 1990 landrover discovery 200tdi please According to my haynes manual for Landrover 200tdi, G - S reg,1989-1998 it goes as follows, Stage 1:- Tighten all bolts

torque and tighten evenly to specification. 2. Check the brake rotor for trueness and thickness variations. Replace the rotor if it is too thin, warped, or if the thickness varies beyond specification

...have a land rover discovery series 2 automatic and when accelerting engine revs but looses power could this be the clutch slipping ? help plse yes its the torque convertor automatics dont have a ...

...2 td5 you can get guide from many sites.. i know few error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete ...

...2-3-D a few times, check level and top back up. You can then take it for a quick run and do another drain and replace to hopefully replace 70-80% of the oil due to what is in the torque converter and ...

...2 discovery auto not selecting gears at the bottom of the selector rod in the gearbox is a snall shaped cam which operates two switches one for foreward and one for reverse its possible that this has ...

...I feel like if I push it to hard, I am going to break something. Please help! drive it on slippery surfaces to relieve the torque wing up and the n move from 4x4 back to 2 wd it will then ...