How are you getting those codes? They dont match with any lists for that year and make
Testimonial: "holding the two buttons on the dash turn key on wait 5seconds push the trip button and it flashes 23 55 over and over"
which i think is short for p0223 but not sure 100%
thanks
thanks
×
SOURCE: Perfect Idle, no Codes, but stepping on gas causes hesitation
i would try cleaning mass air sensor, its mounted in air duct between air filter and throttle body, they sell the cleaner at auto parts stores, also as stated bofore make sure the intake pipe clamps are tight and it's not cracked, if that doen't fix it i would investigate a fuel pressure problem either a weak pump or problem with regulator
219 views
Usually answered in minutes!
has bad oil leak from valve cover but its always leaked
Those codes: 23 is bad intake temperature sensor. 55 is the signal for the end of the codes. So you really only have one and it is the MAF module that senses the air temp. With no signal from that sensor the engine does not know how to set the air fuel ratio.
ok i took it in to have the codes read and the guy at the shop said it was TPS so i replaced it and still the same so i am sure you are correct. WHere i might find this MAF module to replace
thanks found it was map tho i guess mine dont have maf but you got me in the direction appreciate you help
×