SOURCE: crankshaft position sensor location
1990 Chevrolet Cavalier 2.2L TBI 4cyl
The Crankshaft Position Sensor is located under hood, center, rear engine area, below ingnition
coil pack and DIS module, mounted in engine block.
Fig. 1: View of the CKP sensor-to-crankshaft reluctor relationship
Crankshaft Position (CKP) Sensor
A
magnetic crankshaft sensor (Hall Effect switch) is used which is
remotely mounted on the opposite side of the engine from the DIS/IC
module. The sensor protrudes in to the engine block, within about 0.050
in. (1.27mm) of the crankshaft reluctor.
I really hope help you wuth this (rated this help). have a nice day, good luck.
Testimonial: "Awesome. Thanks."
SOURCE: where is the crankshaft position sensor located on
The sensor is located Under hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block. It has the small elec. connecting plug.
SOURCE: Where is the crankshaft sensor on a 93 chevy
chevy corsica 3.1L crank sensor is located on the front of the engine above the starter.
The fuel pump relay should be under the hood on the firewall, square with a 3 in it. Hope you can read it?
228 views
Usually answered in minutes!
×