I had a 91 sentra given to me, previous owner couldnt git it to start. the car would push start just fine but couldnt get it to turn over. i ended up having to run a new ground wire and that fixed it. but now i cant get the heater to work at all. it worked before when we push started it but now with the new ground wire i dosnt work at all the ac light comes on when you pust the button but the fans wonk kick on. ive checked ever fuse relay and wire i can think of and it still wont work. any ideas im really stumped on this thanks for all the help
Check to see if their is power and ground at blower motor with test light. It is located under glove box area.you can make a test light with a tail light bulb and two wires. If no power the fan resister, fan switch, fuse or wiring is bad.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Thermostat is the wrong temperature range for the vehicle or it is installed backwards. It is opening too soon and not allowing the vehicle engine to come up to operating temperature soon enough. Have system checked, replace thermostat with correct temperature for vehicle
my 1992 nissan sentra will not start. It will trun and turn but will not start. when it does start.It missing alot and turn off very fast then it just turns but won't start
Your heater door cable is maladjusted.I would start be removing the heater control and follow the cable to the door it controls. See which end is adjustable - it will have a small screw and a holder.
I would push the lever to full cold and then loosen the cable and let it slide until the lever maxes out in the cold spot on the controller and then tighten again. Test its operation a few times before reinstalling everything.
×