Question about 1996 Geo Metro

1 Answer

92 geo metro crankshaft sensor

My metro quit on me while i was driving. its standard. i was told to get another motor cause some belt strained the motor and something to do wit crankshaft. it seems to want to start . i was not told about this sensor just heard about it. could it be the crksht sensor. where is this located.??

Posted by on

  • Bill Eager May 11, 2010

    3 or 4 cylinder?

    3's are interferance 4's are not.

    Did you crank the engine after it quit.

    If yes, this cannot do any damage.

    Did you check the timimg belt?

    Open the air cleaner, put your hand over the carburater, crank the engine, does it **** or breath both directions?

    **** is good.

    Breat in and out, broken or jumped timing belt.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAVE A 1996 gEO mETRO. and i had the same problem. I was driving and out of no where the car shut off. and it would not start....
i was told it was the cam censor. that's in the distributer... my total cost for the part was around 200 from NAPA. Labor about 32....
sorry my fist language is Italian so forgive my spelling

Posted on May 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How much oil goes in a 92 geo metro three cylinders.


buy 4 qt.
fill to top mark,
always buy extra oil, so you can keep it full , im sure any 92 burns oil,tad more than new.
or if you drive fast , it sure will burn more.
fsm quote 3.7qt


25354906-sckxypulg1bw0dyocx0nmtbh-2-0.jpg

Jan 04, 2015 | 1992 Geo Metro

1 Answer

Need a serpentine belt routing diagram for 92 geo metro 3cyl


should be under hood or on right side strut tower or most parts places will give u a diagrams goodyear belts have them on them

Feb 25, 2013 | 1995 Geo Metro

1 Answer

My 92 geo metro idles badly, the gas milege has gone down, and theres a faint smell of gas after i drive for awhile. A local shop told me it's probadly a sensor, but this model cant be hooked up to the...


its your o2 sensor tells the comp amout of fuel to air.1 on the header pipe and maybe 1 down by the catalytic converter. you'll need an open side socket to change it.common problem

Nov 24, 2009 | 1992 Geo Metro

2 Answers

1998 Geo Metro. The engine runs away. The motor


Could be your thottle possition sensor.

Jul 05, 2009 | 1997 Geo Metro

2 Answers

Timeing belt for 92 geo metro 3 cyl


The timing marks are as follows
1. there is a "V" on the cylinder head cover.
2. Timing mark on camshaft timing belt gear
3. "Arrow mark" oil pump case
4. Punch mark on crankshaft gear.
DON'T MESS UP! THIS IS AN INTERFERENCE FIT ENGINE! IT WILL BEND VALVES!

Apr 06, 2009 | 1992 Geo Metro

1 Answer

Replacing broken timing belt on 92 GEO


a repair manual will show you the specs you need

Dec 06, 2008 | 1994 Geo Metro

2 Answers

93 Geo Metro


As long as they are the same type of engine ( I believe they should both be 1.0L 3 cyl engines). Most parts for the Geo Metro from 1992 to 1994 interchange with out a problem.

Nov 10, 2008 | 1993 Geo Metro

1 Answer

1994 Geo Metro Oil in breather


sound like the engine is worn out
do a compression test to start.

Sep 24, 2008 | 1990 Geo Metro

1 Answer

Swapped motor in '94 metro 4 cyl.


Check the mass airflow sensor and the throttle position sensor - either of those would cause similar problems if they're reading incorrectly.

Aug 25, 2008 | 1994 Geo Metro

Not finding what you are looking for?
1996 Geo Metro Logo

Related Topics:

560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...