Question about 2007 Chevrolet Avalanche LTZ

1 Answer

Air conditioning light blinks, turns off

When i press the snowflake in an attempt to get air conditioning, the button illuminates, then flashes a couple times, then turns off. In turn, my air conditioning never turns on.

Posted by on

  • jarrod_yost Feb 05, 2009

    thanks for the help! i assume/ am hoping im still under warranty on this issue

  • Anonymous Mar 25, 2014

    BUTTON BLINKS BUT WONT TURN ON

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Either the belt is loose or there is a compressor issue (either the clutch or the compressor is most likely shot)

I used these guys for my last one to have it shipped to me. If you haven't done this before it is not an easy DIY job (you need a vaccum pump, and gauges to do it correctly

http://www.discountacparts.com/

Posted on Feb 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Automatic door lock 1999 toyota prerunner


hi jerome
I have the procedure for Toyota auto lock, is worth to try it
AUTOMATIC LOCK SETTING
1) Step in the vehicle and make sure that all doors are closed completely
2) Insert the key into the ignition key cylinder.
3) Wait for more than 5 seconds.
4) After turning the key to the ACC position, turn the key from the ACC to the
ON position 5 times within 10 seconds (Last position : ON).
? Status Monitor LED will illuminate for 30 seconds.
Note : In case you implement 6 times or more by mistake,
action steps 6)-8) you made will be canceled.
Please retry from step 2).
5) While the LED is illuminated :
• Open and close the driver's door 2 times.
• Turn the key to the ACC position.
? LED will continue illuminating.
? Indicator lights will flash 2 times.
Ignition controlled door lock ON :
6) While the LED is illuminated:
• Open and close the driver's door 1 time.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
? Indicator lights will flash 1 time.
? LED will extinguish.
Ignition controlled door lock OFF :
6) While the LED is illuminated :
• Open and close the driver's door 2 times.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
? Indicator lights will flash 2 times.
? LED will extinguish.

Jan 28, 2014 | Toyota Camry Cars & Trucks

Tip

Volvo service light 1996-00


850,
S70,
V70,
S80


1996-97,
1998-00,

1999-00

Service reminder lamp must be reset with either a Scan Tool Connected to the Data Link Connector (DLC), or connect a Volvo Rest Tool to the DLC and press the button on the tool to reset.


240


1986-93

When the "SERVICE" is illuminated, reach behind the instrument panel and push the level located between the tachometer and speedometer.


740,780


1986-88,
1988-90

When the "SERVICE" light is illuminated, reach behind the instrument panel and press the button located to the right of the speedometer.


740,
760,
850

w/ Yazaki Cluster*,
940,
960


1989-92,
1986-90,
1991-97

When the "SERVICE" light is illuminated, remove the cap on the face of the instrument panel between the clock and the speedometer. Insert a thin-bladed tool into the cavity and press the reset button.

*Odometer above the speedometer needle.


All Models


1999

Press and hold trip odometer reset button. Next, turn the ignition key to the run position KPII (not the start position). Wait 30 seconds or until service light begins blinking. Turn the ignition to off position. Release the Trip Odometer button.


850

w/ VDO Cluster*

All Years

To reset the Service Reminder Indicator, turn the ignition on while the engine is not running. Access the diagnostic unit located on the left fender well under the hood. Connect the single wire plug to terminal #7. Press the reset button four times shortly. When the LED glows, press the button once. When the LED glows steadily again, press the button five times. When the LED glows steadily again, press the button once. After the LED gives a couple of rapid flashes, the system is reset. Unplug the connector and turn the ignition off.

*Odometer located below the speedometer needle.











on Dec 07, 2009 | Volvo 850 Cars & Trucks

1 Answer

I tried turning on my air conditioner in my 06 gmc envoy denali by hitting the snowflake button it started to blink then it stoped and went off please help me


you need to get your ac serviced and computer checked for an air conditioning system code/malfunction. when the light in the button flashes it means a problem has set a code in your body control module that controls the ac.

Jan 11, 2011 | 2006 GMC Envoy Denali

1 Answer

How do I turn on my air conditioning on my 2005 caravan. I do not have an owners manual. Thank you.


Looking at your climate control panel, you should see a square button on the upper right section with a snowflake symbol on it.

Depressing this button should cause an amber LED to light when the blower fan is on, and activate the AC compressor.

You will also activate the compressor when you select defrost with the mode knob.

Don

Apr 15, 2010 | 2005 Dodge Caravan

2 Answers

Blinking panel lights


To Calibrate , start and warm engine to normal operating temp. with engine idling turn blower switch to high, turn mode switch to panel, open all outlets, move temp lever to full cold.
press and hold rear wash and rear wiper buttons simultaneously for 5 seconds (untill all leds illuminate.) all leds should light up for 5 seconds, rear wiper and intermittent rear wiper button leds will flash alternatly during calibration... after 60 seconds if only rear wiper button led is flashing, cal. is complete

Jun 18, 2009 | 1998 Plymouth Voyager

2 Answers

Air conditioning quit working on Lexus ES300


the lights on dash button indicate a malfuntion system , securely the freon 134a is goen on

Apr 03, 2009 | 1999 Lexus ES 300

1 Answer

Re: 1998 Mitsubishi Diamante Air Conditioner problem


check the refrigerant it might have 2 be recharged

Aug 18, 2008 | 2002 Mitsubishi Galant

1 Answer

Air conditioning light


HEY GUYS! YOU ALL HAVE GOT A HAIRY ONE HERE, BUT I'M GOING TO JUMP IN HERE WITH ONE IDEA THAT I THINK WILL SOLVE THIS MESS. WHAT WE HAVE HERE IS AN A/C COMPRESSOR OVERHEATING AND SENDING OUT THIS WARNING SIGNAL( THE FLASHING ORANGE LIGHT ) AND SHUTTING DOWN THE CAR TO KEEP FROM BURNING UP THE COMPRESSOR. IF YOU CAN CHECK THE COOLANT LEVEL IN THE A/C SYSTEM IN THE CAR, YOU WILL PROBABLY FIND THAT IT IS LOW AND NEEDS R-134A ADDED. YOU CAN GET ALL THIS AT WAL-MART OR ANY PARTS STORE. JUST FOLLOW THE DIRECTIONS AND ONCE YOU GET THE LEVEL SET CORRECT, I THINK YOUR PROBLEM WILL BE SOLVED AND YOU WON'T HAVE ANYMORE STALLING.THIS IS A SAFETY FEATURE TO PROTECT THE COMPRESSOR BECAUSE THESE THINGS CAN COST A BUNDLE TO REPLACE. GOOD LUCK AND I HOPE THIS WORKS FOR YOU! IT'S THE BEST SHOT I HAVE FOR THIS, BUT I FEEL IT'S THE ONE! IF YOU NEED MORE HELP, REPLY TO:ARCLIGHT1217

Aug 06, 2008 | 2001 Dodge Stratus

1 Answer

Flashing lights


Hi, had the same problem today. Solution: Start engine, blower on max, air direction to cabin, press rear wiper and rear wash buttons simulanteously for 5 seconds (all lights now on steady). Calibration test starts and lights flsh alternately. After first test, AC and recurculation lights flash for the cool down test. If all test pass then rear wiper light blinks slowly (press to exit self test). If AC and recurculation test fails then just 2 lights stay on. To repeat this part of the test press just AC and rear wash simulanteously ( may take several attempts and usually best when engine is cold). Again exit by pressing the rear wiper button once it is the only one flashing (slow blink).

This does work but it took me 15 minutes to finally switch them off!!!

Jul 28, 2008 | Chrysler Voyager Cars & Trucks

Not finding what you are looking for?
2007 Chevrolet Avalanche LTZ Logo

Related Topics:

642 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...