Question about 1999 Dodge Ram

Open Question

Where is the temperature sensor located in a 99 Dodge Ram 2500?

Need to find location of temperature sensor?

Posted by on

  • yadayada
    yadayada May 11, 2010

    temp sensor for what?

  • Rudolf Diesel
    Rudolf Diesel May 11, 2010

    Hello

    Withc motor is in your dodge?

    RD

×

5 Suggested Answers

  • 2 Answers

SOURCE: 99 cadillac de ville

the coolant temp sensor is at the rear of the engine and is a "bad word" to get to. the 3 relays are at the bottom,under the fans. if you remove the driver side fan out of the way( 2 10mm bolts holding the fan) you should have good access to them. they do have locks on them and may be tricky to unplug. there is a 7/16 nut holding the relay plate down. remove and it should be easy to remove them.

Posted on Jul 09, 2008

  • 153 Answers

SOURCE: location of speed sensor a for 99 dodge intrepid

The "Vehicle Speed Sensor" signal is generated by the transmisson output speed sensor. That is the one located at the rear of the case. It is externally mounted. That supplies "vehicle speed" info to the other On-Board Computers. The input turbine speed sensor is located just behind the bell housing area of the case. I believe the trans controller is the only module that needs that info. The Crank Position Sensor give engine RPM info and it is located on the bell housing near the engine block. I hope this helps.

Posted on Apr 02, 2009

suterman
  • 158 Answers

SOURCE: I need the location of MAF sensor in a 1998 Dodge

Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.

Posted on Jul 02, 2009

  • 701 Answers

SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?

Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

Posted on Jul 07, 2009

  • 87 Answers

SOURCE: location of crank position sensor 5.9l v8 dodge

the crank sensor is on the right(passenger side) rear of the engine block you will need a mirror to see it it is acessed from the top of the engine to remove the bolts you need an extra long 1/4" allen socket it is a royal pain to get to i have changed too many and usually have to find it by "feel"

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the coolant temperature sensor located on a 1995 Dodge Ram 2500 with a 8.0 V10 engine


My info says front top of engine near water outlet. You can also check the wiring colors at sensor to double check, use wiring diagrams to get wire color.

Jul 02, 2015 | Dodge Cars & Trucks

1 Answer

Map sensor location for 2003 dodge ram 2500 5.9 diesel


Mass air pressure sensor location should show on parts stores parts location charts, or you could buy a shop manual.

Feb 05, 2015 | Dodge Cars & Trucks

1 Answer

Where is the coolant temp.sensor located on 2001 dodge 1500


The alternator needs to be removed to easily access and locate coolant temperature sensor.For more details and ECT diagram on 2001 dodge ram click the link below and follow the details to replace the coolant sensor:-----

http://technoanswers.blogspot.com/2012/10/dodge-coolant-temperature-sensor.html
--------
These details will help.
Thanks.

Oct 21, 2012 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Where is the filter located on a 2001 dodge ram


2001 Dodge Truck RAM 2500 3/4 ton 4WD 5.9L Turbo Diesel 6cyl the Fuel Filter is located under hood, passenger side, lower engine area, mounted above starter.

2001 Dodge Truck RAM 2500 3/4 ton 4WD 5.9L SFI 8cyl the Fuel Filter is located under vehicle, center, below seating area, mounted on top of fuel tank, in fuel pump module.

Hope helps with this (remember rated the help).

Jun 01, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

Where is the oxygen sensor for 1996 dodge ram van 2500


All O2 sensors are located in the exhaust manifolds and in the exhaust front pipes close to the catalytic converters.

Feb 21, 2010 | 1996 Dodge Ram 2500 Club Cab

1 Answer

Mass air sensor on a 2000 Dodge Ram 2500


inline of air duct (plenum) after air filter

Nov 30, 2009 | 1988 Dodge D-Series Pickups

1 Answer

Speed sensor 1999 dodge ram 2500 diesel location


On my 99 ram 1500 it is on the right side of the tranny near the end with 2 wires that unplug. I replaced it with no lose of fluid, in 2 minutes.

Nov 12, 2009 | 1999 Dodge Ram 2500 4WD

1 Answer

Where is the Crank Position sensor located on a 99 Dodge 2500 V8 4 wheel drive.


behind engine passenger side top of trani betwem block and trani simple to replace

Oct 07, 2009 | 1999 Dodge Ram

1 Answer

Where is oil pressure sensor located on 2001 dodge 2500 cummins?


Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

Jul 07, 2009 | 2006 Dodge Ram 2500

1 Answer

No spark 99 dodge ram 2500 4x4 360v8


you need to replace your crank sensor!

May 07, 2009 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
1999 Dodge Ram Logo

Related Topics:

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63575 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...