SOURCE: where is the serpintine belt tensioner on a 2003 Toyota Canmry (4cylc)
its in between there you need a 19mm and a long breaker bar you will see it its really uncomfortable...
SOURCE: serpintine belt making noise/ or belt tensioner
change serpintine belt I had one that it made noise changed belt noise went away
SOURCE: Serpentine Belt routing diagram for 2007 Toyota
Installing fanbelt on 2007 Toyota Tundra 5.7
SOURCE: how do you change a 07 toyota tundra serentine
Insert a ratchet or breaker-bar drive (end of bar) into the square hole in the tensioner / idler pulley mount. Move the tensioner mount in whatever direction is required to release tension on the belt. You will then be able to remove the belt. Install new belt similarly -- there should be a routing diagram under the hood for the belt -- if not, it would be a good idea to diagram it yourself before you remove the old one.
Charlie
Accessory drive belt adjustment-3.3L and 3.8L engines
Click to Enlarge
All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic tensioner.
Raise the front of the vehicle and safely support it with jackstands.
Remove the right front splash shield.
Release tension by rotating the tensioner clockwise.
Remove the belt and install a replacement.
Proper belt tension is maintain by the dynamic tension.
Install the right front splash shield. Lower the front of the vehicle.
73 views
Usually answered in minutes!
×