I have the code P0112 I was told it is the Intake air temp sensor, So I bought one, I am trying to replace it but I cant seem to find its exact location, Can someone help me
P0112 is the code for a intake air sensor problem. If you can buy one seperate it will be located between the Air filter and the Throttle Body ... usally near the Mass Air flow sensor . I am a Jaguar Tech our are located inside the Mass Air sensor . Also ck the actuall housing of the air filter assembly
SOURCE: need location of coolant sensor on 2002 chrysler 300m
near the thermostat I think, look for this part.
SOURCE: I HAVE A 2003 CHRYSLER 300M SPECIAL 3.5HO AND
yep po132 shorted to voltage po152 shorted to voltage.this means lean conditions .you got in take leak .if you get a high voltage conditions you got rich mixture.bad plugs or stop up air filter.
SOURCE: i have a 2002 chrysler 300m problem code p0073
Hi,
On2.7L models, the IAT sensor is located on the left side (driver) of the Intake Manifold plenum, if you are standing in front of the car, it is the sensor right before the two vacumm hoses plugged into the Intake Manifold.
On 3.2L/3.5L models, the IAT sensor is incorporated whthin the Map sensor which is also located on the left side (driver) of the upper Intake Manifold plenum. Right by the coolant reservoir tank.
Good Luck
SOURCE: Where is the intake air temperature sensor
In most cars, it is placed in the same chamber as the intake air filter. In my 96 corolla, it is on the "clean air" side of the filter box just before the pipe that leads to the manifold. The only thing i can think to compare the apperence of the sensor to would be something like a small rubber spark plug. If it is not in the air filter box, it has to be somewhere attached to the manifold or the pipe leading from the manifold to the air filter box. Let me know if this answers your question and rate my response please.
1,028 views
Usually answered in minutes!
Do you have a picture or diagram of its location.? Please
Actually I have found the problem. What happen is that autozone gave me the IAT sensor for the late model 2001my car is a early model 2001. So the iat sensor is combined with the mass air flow sensor. Completly diffrent part for the same year vehicle. Its located on the side of the manifold on DS next to the ****** dip stick! Wow whata mission this was.
×