When it starts everything is fine when it does not it will not turn over
[email protected]
I have the same issue i even replaced the starter to be told by a mech. about 6 months later when it STILL was doing it that it was the neutral safety switch, try putting it into neutral and then see if it starts with out any porblems that is what i have had to to for the last year and now it is getting bad enough that i will have to replace the switch
just a thought
Battery terminals and cables should be clean and tight before you check anything else. After that, check starter and relays for intermittent operation. This is not a "solution" but is the best place to start looking!
161 views
Usually answered in minutes!
I have the same problem, I can hear the starter relay click and can start it by jumping from the batt to the starter sol.Can anyone tell me what voltages should be at what pins at the relay or does someone have a real good wiring diagram
Our jeep does the same thing.. When it decides to start it runs fine otherwise we have to jump it but then if you let off the gas it boggs and dies. I know for a fact it is not the starter, battery, or fuel pump. I only wish there was a solution that makes sence but no-one has a clue whats wrong..
×