Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on May 01, 2012

How to change timing chain on 2003 dodge ram 4.7 eng.

5 Related Answers

Anonymous

  • 341 Answers
  • Posted on Nov 17, 2008

SOURCE: don't know if car has timing belt or chain

It has a timing belt.. it is recommended it be changed every 105,000 miles

Ad

Anonymous

  • 1 Answer
  • Posted on Jan 28, 2009

SOURCE: time clock change on dodge ram navigation radio

Press "NAV" to go to the main navigation menu.

Scroll down and select "System Settings"

Scroll down and select "Clock Setting"

Make sure "Show GPS Clock" is selected with a red check in the box.

I had to switch "Daylight Savings" from "ON" to "OFF" in order to bring the time back an hour. I assume that I'll just have to switch it back to "ON" in the Spring in order to move the time forward and hour.

Anonymous

  • 249 Answers
  • Posted on Jan 05, 2010

SOURCE: replace timing chain on 03 dodge ram 1500 with 5.7 hemi

i have an 02 and i purchased a repair manual from autozone

Anonymous

  • 1985 Answers
  • Posted on Jan 10, 2010

SOURCE: 1998 dodge ram 1500 2wd 5.9 eng. how to change

just drop the transmission pan to drain it and the filter is right there in the valve body,DON'T mess the band adjustment,they are only to stop the planetary gears so you can go into reverse,there is no such thing as adjusting bands! that went out with the fifties!

Anonymous

  • 373 Answers
  • Posted on Apr 30, 2010

SOURCE: replacing 2000 dodge caravan timing belt - how do

rotate crankshaft in a clockwise direction until both timing marks are aligned together on both camshaft gears and the crankshaft timing mark aligns with mark on the block just behind the crankshaft gear. you may need to rotate the crankshaft gear several times before you can get all the timing marks to align. once you have done this then insert a allen wrench in the hole on the belt tensioner and a small drill bit or a small allen wrench in the smaller hole. take the largr allen wrench and apply pressure counterclockwise until the small drill bit or allen wrench slides into locking hole to hold the belt tensioner in place. install belt and release the tensioner. (note: before starting work on engine remove the negative cable from battery).

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

What do I check for eng surges 300 to 400 rpm on 2003 Dodge Ram 4.7 eng

Restricted injector, lockup converter solenoid kicking on and off, MAP sensor, TPS worn spot .
1helpful
1answer

2003 Dodge Ram 1500 with 4.7 eng. Changed all calipers and rotors. Bled brakes with half gallon fluid. Did it with eng off and doors open. When done turn eng on and pedal goes to floor. Pls help

Did you let the fluid drain out of the master cylinder? If so, you have to bench bleed it. And you probably have air in the ABS valve assembly.
0helpful
1answer

Diagnosing a 2003 dodge ram 1500 slt v8 4.7 liter magnum engine 3 piece timing chain making a lot of noise behind the harmonic balancer and check engine light code p0305

Timing gears wear and the chain stretches with time. p0305 means cylinder #5 has a misfire.It'd probably time to replace the chain and gears.
1helpful
1answer

How much torque for each head bolt in a 2004 Dodge ram 1500 3.7 liter

Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:
  1. Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)
  2. Step 2: Bolts 1-10 verify torque without loosening
  3. Step 3: Bolts 9-12 to 10 ft. lbs. (14 Nm)
  4. Step 4: Bolts 1-8 plus 1 / 4 (90 degree) turn
  5. Step 5: Bolts 9-12 to 19 ft. lbs. (26 Nm)


26002143-2qxw3km0vcnqu3setvnduoab-2-1.gif
0helpful
1answer

Have a 2005 dodge ram with 5.7 hemi has an eng

Dodge/Chrysler EGR valves are known to be unreliable. The one on my wife's 05 Grand Caravan died in the 40k miles range.

They are not really serviceable. The usual fix is replacement. Part will be between $50 and $150 depending on where you get it. Installation most of the time is 2-4 bolts and the harness.

Don
1helpful
1answer

My truck just stopped running and it now just

check secondary ignition ( spark getting to spark plugs ) your statement is telling me it isnt fuel, if the mechanics of the engine is good it can be secondary ignition also high mileage eng. might be a bad timing chain.. In the future eng. size is helpfull......
2helpful
1answer

I have a 1987 Dodge Ram 50 sport 2.6 litre the head gasket is blown how do i get the timing chain off to replace the gasket

You have to remove the oil pan - harmonic balancer - timing cover to replace timing chain... to replace cylinder head gasket and not the chain -- you need an assistant to hold the camshaft gear with chain on it. Suspending it with wire to keep the chain from moving the timing (do not let the chain relax as it will come off the crankshaft gear and change the timing)
2helpful
1answer

Don't know if car has timing belt or chain

It has a timing belt.. it is recommended it be changed every 105,000 miles
Not finding what you are looking for?

752 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...