Does a Hyundai Getz 2007 engine have a timing belt

SOURCE: how often do I have to change the timing belt

On the 2L (4 cylinder) engine it is recommended to inspect the belt at 37200 miles and replace the belt at 56000 miles.

On the 2.7L (V6) it is recommended to replace the belt at 60000 miles.

And, both these engines are interference engines (meaning if they break a belt, pistons hit and bend valves) which is not a pretty sight...

SOURCE: timing belt on my 2002 hyundai accent 1.6 liter 4cyl

Was It Starting Before?
Who Changed It?

If The Belt Broke And The Belt Was Just Put Back On Without It Being Put In (TDC) Top Dead Center The Car Will Not Run. Warning! Trying To Start It Over And Over Will Destroy The Engine.The Engine Works By Being (TDC) Top Dead Center The Timing Controls When The Cylinders Come To The Top. The cylinders Are Controlled By The Timing So When The Spark Plugs Try To Ignite. The Cylinders Are Not In Position And Thus Will Not Create Combustion For The Engine To Run.

SOURCE: changing timing belt on 2004 hyundai accent

Sign up for an account on hmaservice.com. Once you do so, log in and click on "Shop". You can then enter your year/make/model and you will find the info under, engine mech. system>timing system>timing belt>repair procedures. Very detailed, and best of all, FREE.

SOURCE: Timing belt in a 2005 hyundai replacement

You should find another dealer. Hyundai recommends replacing the belt every 60,000 miles and this dealer knows this. No reason at all to replace it at 42,093 miles. Remember that this is an interference engine so if the belt breaks serious engine damage will occur. Do not neglect this service at 60,000 miles.

Testimonial: "Thank You so much! I'll schedule my replacement at 60,000 with another dealer. :)"

SOURCE: When should I change my timing belt on my 2007

you wont need to change it until at least 100,000 miles. Typically that will last the life of the car. But alot of people, including myself, wait until it breaks to replace it. It is about $1000 to replace because the engine has to be partially disassembled.