20 Most Recent 2003 Ford Streetka Questions & Answers

I think the fuse has blown for my electric windows on my Streetka 05. Where do I locate the fusebox?

this may be fused or has a circuit locate fuse panel check these circuits if fuses are good remove the switch and check connection at switch as well as for power at the switch with a test light.

The hard-soft pedal is normal, it means the booster is working.You probably still have air in the lines somewhere.I would jack up each wheel and see if you can tell which cylinder is not working. Depending on the system used, it may or may not have an equalizer valve that is supposed to balance pressure to all 4 wheels.

This could be two different issues. For the dash light get the vehicle plugged into an OBD scanner or a diagnostic system to check for Trouble Codes. These will give clues as to what and where the issue could be. Comment below with them and I'l try to help explain them. Unless the problem is with the brake booster most traction control systems do not use a vacuum to operate it. It is usually a set of electronic sensors on the wheels that the ECU uses to monitor tyre grip. As I cannot look at the car myself for that hose you will need to get a good mechanic to look at it. The vacuum hose could go to many things like the EGR system, the Turbo (if fitted) or possibly to the transmission.

Only way to get the code is dealership or someone with a radio programmer aka auto scanner

Ford Windsor Torque Specs - Help Center - Summit Racing

https://help.summitracing.com > answers > detail > a_id Apr 11, 2018 - Main Cap Bolts, 60-70 ft.-lbs. ; Connecting Rod Bolts, 22-25 ft.-lbs. (40-45 ft.-lbs. for 289TP and Boss 302) ; Cylinder Head Bolts, 65-72 ft.-lbs ...

Bolt Torque Spec Chart for Ford Engines - Maine Mustang

http://mainemustang.com > 65-73 Mustang Data Ford Engine Bolt Torque Chart ; Main cap bolts, 60-70 ft-lbs ; Outer 2 bolts of main cap bolts, 35-40 ft-lbs.(for 4 bolt main bearing caps only ) ; Connecting rod ...

5.0 HO Engine Bolt Torque Specs - Foxstang.com

https://www.foxstang.com > 5-0-ho-torque-specs Feb 21, 2020 - 5.0 HO (302) Head Torque Specs · Step 1: 23-35 FT/LBS · Step 2: 45-55 FT/LBS · Step 3: Additional 90 degrees (or 75-85 FT/LBS) · Use tightening ...

Immobilizer bypass trick Real not fake

Try and lock up the vehicle withe the key fob. Leave for 20 minutes and until lock with the key fob and try to start in usual way.