2007 Chrysler Town and Country - Page 4 - Answered Questions & Fixed issues
Brak abs esp light are on
ABS is automatic braking system. Check brake fluid, if full Thats not the problem. Take to Dealer or trusted brake shop. Brakes are an very important safety device. It's not a DIY thing to do.
Key fob stopped working
sounds like the key fobs have screwed up _ they could need re-setting but l would call a dealer to find out more info
Headlamps problem
Head lights are controlled by the body control module(BCM). Since they worked for a week, I would look at the plug first for corrosion. Smae with the fuse for daytime running lights(DRL) and the relay. After that , I suspect the BCM.
10/10/2014 11:33:43 AM •
Chrysler Town...
•
Answered
on Oct 10, 2014
•
144 views
What causes no spark at plugs on 2002 chrysler town and country
it could be a bad crank sensor but it should have set the check engine light, check for codes anyway as there may be a code set. other things are bad ignition wires, coil pack, lose of power to coil pack, no ground for coil system, the PCM controls ground for the coils so it could be bad connection, bad coil drivers or just a PCM problem.
I 'm getting codes P0841
You are getting all of these codes, because the pcm is seeing readings that do not fall within it's permitted ranges. It sounds like a good time to consult a pro!
5/21/2014 12:02:42 PM •
Chrysler Town...
•
Answered
on May 21, 2014
•
1,463 views
Ac relay not energizing
The engine computer commands the relay on based on input from the dash control and the ac pressure switch. You may need a shop manual to troubleshoot the circuits.
Not finding what you are looking for?