2Sew Happy
Sew Happy posted an answer for this Kenmore Sewing Machines:
"Your machine has a set screw on the needle bar. The scarf of your needle should be down at..."
Sew HappySew Happy posted an answer for this Singer Sewing Machines:
"The hook point spins around, and catches the thread just when the needle rises out of the..."
Sew HappySew Happy posted an answer for this Singer Sewing Machines:
"This is a complicated machine to fix. This website is the best I've found. He's got a lot..."
Sew HappySew Happy posted an answer for this Singer Sewing Machines:
"Remove your bobbin case and inspect it for any damage. Scratches, holes, snags. Sometimes..."
Sew HappySew Happy posted an answer for this Singer Sewing Machines:
"Rust on the contacts inside can cause this. Usually, a good cleaning, and adjustment of..."
Sew HappySew Happy posted an answer for this Singer Sewing Machines:
"Push the bulb in, twist, then pull out. It can be a bit tricky, so be careful."
Sew HappySew Happy posted an answer for this Baby Lock Sewing Machines:
"Unfortunately, this is a computer issue. You may have to replace the module."
Sew HappySew Happy posted an answer for this Sewing Machines:
"It doesn't have anything to do with sewing machines."
Sew HappySew Happy posted an answer for this Sewing Machines:
"If you can adjust your foot pressure, loosen it slightly. Turn your upper tension to a..."
Sew Happy
Sew Happy posted an answer for this Singer 2950 Mechanical Sewing Machine:
"Sounds like your motor is going out. Engage your bobbin winder, and make sure the needle..."
Sew HappySew Happy posted an answer for this Bernina Sewing Machines:
"Is this the vintage 830 record, or the new electronic model? If it's the Record, flip the..."
Sew Happy
Sew Happy posted an answer for this Janome Hello Kitty 11706 Mechanical Sewing Machine:
"There is a removable tray on the front. Pull it to the left. This will expose the bobbin..."
Sew HappySew Happy wrote a tip for Sewing Machines:
"If the thread is not being picked up by the hook, you can set your timing by moving the..."
Sew HappySew Happy posted an answer for this Sewing Machines:
"Your timing is off. The hook must catch the thread on both sides. This is an indication..."
Sew HappySew Happy posted an answer for this Sewing Machines:
"Tensions, broken finger on needle plate, burrs on the needle deflectors, threaded in the..."
Sew HappySew Happy posted an answer for this Singer Sewing Machines:
"Check to make sure your feed dogs are not in the lowered position. Some machines over 20..."
Sew Happy
Sew Happy posted an answer for this Singer White Speedylock 1634:
"Start with the threading sequence. Upper looper, lower looper, left needle, right needle...."
Sew HappySew Happy wrote a tip for Singer Sewing Machines:
"Did you know sewing machine needles can be machined wrong? If your machine isn't..."
Sew HappySew Happy wrote a tip for Brother 925D Serger:
"When threading a serger, you MUST follow this sequence. 1. Upper looper 2. Lower..."
Sew HappySew Happy wrote a tip for Sewing Machines:
"If you have looping under your fabric, there is too much tension in the bobbin case. Turn..."
Sew HappySew Happy posted an answer for this Janome Hello Kitty 11706 Mechanical Sewing Machine:
"This is a very basic model, and is more for minor repairs than actual sewing. If the foot..."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"Sorry, it's not worth the repair cost, and you can't fix it yourself."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"One drop of oil under the bobbin case in the center of the hook, on the wick. Your machine..."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"It's got multiple issues. Best to take it in and get it fixed all at once. Your reverse..."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"I have a feeling the sensor has been jolted just enough to make it stop. Pretty sure this..."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"Your speed slide sensor is bad. Your local repair shop can fix it. There is a chance it's..."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"You don't oil this type of machine. It's not like an old one that needs oiled every two..."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"https://www.youtube.com/watch?v=3lRJq-L00j0 https://www.youtube.com/watch?v=vXEUrzQHEbY"
Sew Happy
Sew Happy posted an answer for this Janome Memory Craft 9000 Computerized Sewing Machine:
"If this is happening during embroidery, please make sure the presser foot is in the down..."
Sew HappySew Happy posted an answer for this Janome Sewing Machines:
"If it's less than a year old, you should have a warranty - take it in. If not, you can TRY..."
Sew Happy
Sewing Machines 96 answers
Tri-Flow Synthetic Food Grade...