kind
neo raisen copy center posted an answer for this Sharp Z50 - Z88 Toner:
"Check all the feed roller."
neo raisen copy center posted an answer for this Sharp Z50 - Z88 Toner:
"They are manny cause of black copy.1.over tone.2.arching on main charger or dirt on main..."
neo raisen copy center posted an answer for this Sharp Z50 - Z88 Toner:
"Check if theres no particles on the paper path.check the size of paper.check the..."
neo raisen copy center posted an answer for this Sharp Office Equipment & Supplies:
"Fusing unit error.try to cancell by using program/simulation.cancell by 14"
neo raisen copy center posted an answer for this Sharp - AR-M550N copier - ARM550N:
"Make sure all the miss feed are remove.open all covers look miss feed papers then close..."
neo raisen copy center posted an answer for this Sharp AR-160 Copier:
"L6 code is a polygon motor problem.replace or replace the laser unit."
neo raisen copy center posted an answer for this Sharp AR-160 Copier:
"L6 code is a polygon motor problem.replace or replace the laser unit."
neo raisen copy center posted an answer for this Sharp AR-5316 Advanced Digital Imager Copier:
"h2 is a fusing/fixing unit problem.also check connector of fusing/fixing unit."
neo raisen copy center posted an answer for this Sharp AR-5316 Advanced Digital Imager Copier:
"h2 is a fusing/fixing unit problem.also check connector of fusing/fixing unit."
neo raisen copy center posted an answer for this Sharp AR-5316 Advanced Digital Imager Copier:
"replace toner cartridge.or if the cartridge has a toner replace ic but be carefull.make..."
neo raisen copy center posted an answer for this Sharp AR-5320 Black and White Copier:
"if triangle code appear and if blinker it means the ic of the toner cartridge is damage..."
neo raisen copy center posted an answer for this Sharp AR-5320 Black and White Copier:
"if triangle code appear and if blinker it means the ic of the toner cartridge is damage..."
neo raisen copy center posted an answer for this Office Equipment & Supplies:
"H4-00,is a fusing troble.maybe the heater lamp is basted, or the thermistor and thermofuse..."