Tasco Optics - Page 8 - Recent Questions, Troubleshooting & Support

Try here: http://www.tasco.com/pages/instruction-manuals/ If your scope is not listed, try similar models as they are often the same as far as info is concerned.

Take a look at YouTube on zeroing weapon sights

Instruction Manuals Tasco Believe it

Look through this web site for one that is similar to your scope. However I don't know why you need a manual for this very simple telescope. The manual will not show you how to find objects in the night sky. It is only very simple assembly instructions. http://www.tasco.com/pages/instruction-manuals/

From the picture it looks like you are holding a small finder scope which usually mounts onto a larger telescope. Usually these are all one unit and do not have replacement eyepieces. If someone took the lens out throw it away as these can be bought for less than $20 brand new. It cannot be fixed at reasonable cost.

Any generic diagonal is fine, and probably better than Tasco's! http://www.optcorp.com/telescope-accessories/optical-tube-accessories/diagonal-prism-eyepiece-holder.html?manufacturer=46 or eBay

There are many many on eBay http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR11.TRC1.A0.H0.Xeyepiece.TRS0&_nkw=eyepiece&_sacat=0 and from mail order retailers http://www.optcorp.com/manufacturer/opt?cat=14 1.25" is the standard barrel size which probably fits your scope. A Plossl type is suitable in your case, more expense is wasted.

Open the battery door, clean all inside with Alcohol & Q-tip. Check that the AG10 or 389 batteries are positive up. Now the compass dial pivots on a shaft. It seems to get caught. Take a strong magnet and rotate it above the compass lying horizontal and spin it until it spins freely. Take it away slowly. Does the compass settle down to accurate heading? If so place back in the top of the model 322BCW observing the glued in marks on the clear window area. Re-screw in, press brass button red LED should light.. If NOT recheck for corrosion. Regards, Don

Go to this link and you'll see several different manuals for your telescope. http://www.manuals.club/results_alpha.php?search=TELESCOPE+TANZUTSU

Go To this link and download the instructions: This model number is different but implies that it is similar to yours. Good luck. http://www.manualslib.com/manual/326927/Tasco-Spacestation-49060700.html#manual

It has to settle in to the mounts an the mounts to the gun. You take a screw driver and tap on the scope as you adjust it. Tap with the handle and just tap it not bang. every time you make an adjustment tap it. The 222 does not give a great kick so you do not get the settling from that, you have to cause it by taping the scope with the screw driver.