Bodycraft Exercise & Fitness - Recent Questions, Troubleshooting & Support

check the brushes, if the machine turns on normal but the engine does not work can be a problem with the brushes, check the connections or wires that go to the motor drive card. Also check the speed sensor is often a magnet

I would say go to your local auto parts store or even Walmart might have Chlorinated Brake Cleaner. It's a great spray type cleaner that really works great for removing solvents without leaving any film behind. It evaporates fast & brings rubber back to it's original state.

bodycraft.com I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511

need to make adjustments to the top plate bolt I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511

This conditions will be cause an abrupt shutdown of the bel and the motor controll detect an sharp increase a drive current and inmediate stop driving belt.Some situation will be damming the belt and cause this error code .Without abuse will be a situation for cause a extreme care and analysis.

Whenever I need bearings, I go to auto parts places. Cars take an amazing range of bearings, and they stock a lot of them. Take one of the old ones with you.

Most treadmills have a kill lanyard. Check that it is properly attached and if it is, the switch needs replaced. murf427

see the block diagram+ photo: