Questions & Answers for: Pioneer yellow metal solution

...Yellow - To terminal always supplied with power regardless of ignition switch position. Red - To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Black (ground) - To vehicle (metal) ...

...Yellow To terminal always supplied with power regardless of ignition switch position. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF Black (ground) To vehicle (metal)

...yellow goes to box and 1 wire is going out to radio from there i hope i have problem becouse i must unplag groud from battery maybe someone has had same problem or somone tell me what am i dooing ...

...yellow one always has power regardless of the position of the ignition switch. The red one only gets power when the ignition switch is in the on position. Also does this only happen when the vehicle ...

...metal surface. The yellow wire should be hooked to a constant 12 volt line, one that is not controlled by the ignition switch. You can find more installation information in the online installation ...

...on the DEH-P5100UB, the mute lead is "yellow/black". I'd check all the wiring and insure that ANY unused leads are securely insulated and kept from touching other wiring or any metal. Hope this

...Yellow) -- Orange/Black ACC (Red) -- White/Black Ground (Black) -- Black or chassis ground(bare Metal) Pwr Ant (Blue/white) -- Pink If your not adding and amplifier than your system remote should be ...

...Yellow To terminal always supplied with power regardless of ignition switch position Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF Blue/white To system control terminal of ...

...Yellow) wire With the ignition OFFThen Turn the Key to ACC and verify voltage on the RED wire.Double check the ground to chassis metal.The radio should power on at this point if both power wires show ...

...i'm not sure if i'm connecting the right yellows or the righ blacks together? Black (chassis ground) Connect to a clean, paint-free metal location. Yellow Connect to the constant 12 V supply ...