Questions & Answers for: Toyota Tercel wire cut

1989 Toyota Tercel 5 speed stick trouble starting Hi I have 1989 Tercel 5 speed stick, recently I had to change the rightbatery connector, it has fusible links in line, I''m not sure thepurpose of it,

...the Electric Lines going to the Light. If so just Unplug and Plug in the New ones. If not, Cut the Wires and Match the Colors with the New

...I have tried spraying intake cleaner into the carb. but problem still how do i re-connect the hot wire to my cigarette lighter in a 94 tercell? find the other end and you may use a wire connector

...it is in, it jerks so violently sometimes i just want to stop and cut it off. i have had ign coil, wires, plugs, and fuel filter replaced. Can anyone halp me out. I would start with the fuel system. ...

...low beam,and a high beam.. cut the high beam wire, and do both sides .and if you want high beams to work,wire both sides to a single throw double pole switch for the high beams to turn on and

...up the light is the ground...the other 2 wires are the low and high beam. cut one of those,if the low beam is now on,you cut the high beam wire. if the high beam stays on,you cut the low beam

...wire, white/black that was cut & installed on the alarm bundle. I removed all taps (including two power taps on the fuse box) and reconnected the black /white wire. Everything else was removed. ...

...cable a little ways and cut into the out part and strip away like you would a wire. If that does not work, you will have to remove the grill and try to get up in there. It is not fun. Hope this ...

...cut the wire before and after them, and solder in a new fuse link. Take the old bad ones with you to get the proper replacement. Check all the fuses under the dash and see if they are ok. There are ...