Questions & Answers for: Minolta Magicolor waiting for the end

Magicolour 2300 Toner cartridge problem The laser is saying that the toner is not installed. Does anyone have a 'fix' for this problem? Is there a switch or contact that needs cleaning? Any help much ...

paper feed The unit does not pick up the paper from the in tray. Please advise of any solutions. Thanks! If it occurs with duplex printing, it is a problem of static electricity. Print one side, wait ...

magicolor 2300 W cartridge rotation for replacement?? Should it automatically rotate so that I can get to the next color? Am I supposed to do it manually? Thanks, [email protected] Open the printer ...

magicolor 2200DL Hi. I have Minolta magicolor 2200DL and problem. After switch on the printer on LCD appear - "calibrating FW:412050G123D0". Do you know how repair the printer? Thank you, Tom. ...

waiting on input end job Our magicolor 3100 has suddenly stopped printing any images and keeps coming up with the message - waiting on input end job. I have tried printing from 2 separate macs with ...

just warms up and then flashes Error next Ready light The OPC DRUM needs to be replaced. Near End of Life. Display Window will show Drum Near End. (About 4% or 5% left) I posted articles about this on

dirty printouts The drum assembly probably needs a good cleaning, you remove the assembly and take a white clip off of one end and pull the shaft out to release the drum. Handle carefully and put in a

konica minolta magicolor 2350dl drum replacement error message says drum cartridge end of life after replacement Was the new one new? Check the medal connectors located on the image unit anything ...

...house chores prior to getting ready to print. so something is not getting done and the printer is waiting for that chore to get done they don't always give codes saying something is wrong. What has ...

my Konica Minolta Magicolor 2350 printing is faded even though a nice image is in the transfer belt and OPC drum; at the end of each printing gives paper jam on transfer error-please help! it sounds ...