Questions & Answers for: Visioneer can i unplug the scanner

30 seconds after plugging it in and turning it on I heard a 'pop' or 'snap' from the scanner, and I unplugged it. I turned out that I had used a 12V -AC- adapter; I tried it with a 12VDC-1.25A adapter

...scanner, unplug the connecting lead and lift off. Remove the TWO screws near to the rear edge, holding the scanner plate in place. GENTLY lift the lid around 15mm (the edge that has just had the ...

possibly faulty or on the way out. try uninstalling and re-installing the scanner. Also check that the AC adaptor is,nt overheating, unplug for an hour and then retry setting it up. Mike @ Compurepair

...scanner. how? please instruct me. Thankyou I have the same problem with a 5800 and 5820 model occasionally. No switch. But I have found if I jiggle the cords on the 5820 model or plug and unplug it ...

...unplug the power plug on back of scanner --go to visioneer website and get the xp driver for the 4400 scanner--save instead of running the download ---right click the downloaded installer and click ...

Unplug the scanner from the computer 3. Restart the computer 4 Install the software from the CD. 5. plug in the scanner to the computer and let windows detect the scanner. 6. (optional) restart again.

...message appear before and never had problems. Please help. I am ready to throw it!!!!!! If you can get the top off, unplug the scanner and move the scanner bar half way accross. oil the silver

......scanner light does not go on. a box appears that says, " no camera found..connection invalid". I unplugged and reconnected every connection. HELP! Somehow your scanning device has been set to ...

...unplug usb lead between scanner and pc. go into add/remove programs and remove any scanner software that may be showing. load correct scanner driver (preferably the latest version from the ...